Milli V

Where can I get this Adamem v1.81 animal? I've been using version 1.0 - and as for the VD (sorry I like calling it that) I am working on the hardware now - it is chugging along nicely!

http://r.ebay.com/LIeKt7

http://r.ebay.com/iS9HQ6

Does anyone have any details ( or source ) on the .dsk file format used for Adam disks in Adamem? I would like to have this as an option in VD

I had the pins get stuck on one before

Check the cable and contacts - you may be getting intermittent shorts

Here is one I have on eBay http://r.ebay.com/mkTGXK

I have a few

Thanks! Looking at the firmware pdf i see 8 lines out but can't tell which lines are input?

I'll be listing a drive next week You can see what I have to sell at: http://www.ebay.com/sch/spinningwebz/m.html?_nkw=&_armrs=1&_ipg=&_from= The last drive I had went in 2 hours for $350 - this one will probably go just as fast, they are a rare thing on eBay - personally I like the DDP's more myself - get that full retro vibe - but I need a disk to be able to transfer stuff to / from the PC - once I eliminate that with the VD I'll sell the other drives I have Milli V

Does anyone have any information on the JK Parallel Driver board? I/O ports, Dip Switch settings, Pinouts for the connector?

An Atari 8-Bit Dream System - Fully Tested! http://r.ebay.com/a1PGfx

Over the attached Joystick too

Selling 2 sets: http://r.ebay.com/n70v9l and http://r.ebay.com/1xynO4

http://r.ebay.com/FsQLgL

Thanks is it f9

Hi - am using the AdamEm emulator and according to the instructions the Coleco controller is emulated using the cursor keys, but they just act like cursor keys and do not register when I use the pdl(5) command in Smart Basic. Do I have to do something to use them?

I would want to think TDOS - the help file reads like the manual for 4.5 including the command go and the various format commands

Going through a ton of software I just got I came across this DDP - Is this TDOS before it became TDOS?

Thanks for this tip!

This is the text from the back of the EOS Programmers Guide: ; ;If you would like a CP/M disk copy of the source code along with a BOOTABLE ;version of the DEMO, please send $5.00 to the author. All profits will ;be chanelled back into ANN to fund other projects. Anyone happen to have this disk? In .dsk format? I've ocr'ed and corrected the code but would love a real copy of the original Milli

Hi guys - am doing some low level programming on the Adam using the EOS Programmers Manual and I am stumped about something and hope maybe one of you learned people can help me. When ever I put text to the screen using either the Put VRAM option (FD2C) or the Console Display Regular option (FC33) my text blinks. By blinking I don't mean normal then inverse, but on / off at the same rate as if it was flashing (using Flash) or the cursor blinking. I have tried using different tables (my own and the internal one) with no effect. Anyone have any clue? Also on the same note - does anyone know if the sample program at the back of the EOS Programmers Manual is available online before I type in all the pages? Milli

Ill look

How accurate is the AdamEm emulator (under dosbox)? I have been experimenting with the 40 column program in hackers guide vol 2 (and I rewrote it in an ML program that I bload) and it works but as soon as the screen is full and needs to scroll the screen goes blank. These programs work correctly on the real hardware. I have version 1.0 of AdamEm - I haven't seen any newer versions out there. Milli

Hi guys - I have an atari 800 I am working on and am looking for the number 8 key. Anyone have one they want to sell laying around in their parts bin? Milli