INTVCruise
-
Content Count
116 -
Joined
-
Last visited
Posts posted by INTVCruise
-
-
Just now, Jason_Atari said:Thank you!
-
Hello everyone, I just received a Frontline Coleco cartridge for the 2600, except that it is grey like one of the cbs electronic cartridges. The shell is an original coleco cartridge, usually white, but this one is clearly grey, not sun damaged or anything. Any idea where it might have come from? The label is original and stuck on there. Looks identical to my white cartridge copy. Thanks!
-
Hello everyone, thanks for everybody's help, got so busy totally forgot about this. I have 3 non working adapters, all of them are the kind with two screws in the middle and the screws underneath the feet. All 3 of them are already opened, can someone please suggest where I can buy replacement parts to fix them, maybe post a link to the part, or a list of parts needed, I would appreciate it greatly! Thank you!
-
Hello everyone, I had a working one a little while ago that I literally just tested and it's dead. I used it about 3 times no problems, put it away and never touched it again and now for some reason it just wont work. I used a multimeter on it to see what was up and the voltage output is about 3-5V, if I leave it plugged in, the voltage seems to rise steadily but never enough. I currently have 3 power supplies that all do this, is there anything I can do to fix them, I can solder quite well just need to know what to do. Thank you!
-
Hello everybody, I just got this cartridge backup tape but I'm not sure what I'm doing wrong, I insert the pack and keep trying to backup the cartridge but all I get is the message that the game is "not enough room for this game" even though there's nothing else on the tape, also I tried using blank tapes with nothing on them, still get same error message? Video hustler is also not on the tape even though it says it is. Any ideas on what I'm doing wrong? Thanks!
-
Thank you everyone onw for the quick replies. I appreciate it very much!
-
-
Since you have an overlay too About $2000 to $3000 for a Vectrex Mr. Boston cart . Finding the right timing and buyer. But then final sale value obtained could also be less.
Does the cart work? Nice to see a test.
Thanks for the info, I tested it and it does work.
-
Hello, I recently just acquired a copy of Mr. Boston for the Vectrex with the back label in tact as well. It came with the screen overlay but no box unfortunately. I was wondering what the approximate value of the pair would be and also a little bit of information on how many copies there are and I would like to know a little about the history of how it came to be as searching didn't yield much info other than it was given away as a promotional item in some sort of ad maybe? Thanks!
-
2
-
-
I'd say no more than $20 max. $15 is the neighborhood I'd be looking at, though.[/quote
Ok thank you very much for the information, I'll shoot for that price range.
-
And don't buy it from Happiestsellerever or Tech Blasters on eBay. They are a couple of resellers that are beyond overpriced and have lately been posting a lot of Sears pic labels. I'll have to take a look to see if I have another. I finished my set some time ago.
Thanks for the heads up, what would be a fiar price to pay for one in god condition? Thank you!
-
Hello, was looking around and couldn't find much on this one. Is the sears picture label baseball hard to find? Thanks.
-
Have you tried cleaning the cartridge contacts?
With regards to rarity and value, Memory Manor is one of the rarer games but is not that rare - probably classified as scarce, but certainly not super rare. I believe $15 to $30 to a typical range for a loose cart, depending on condition. More if it comes with the game manual and much more if complete in box.
Hello, thank you for the information. I did clean the contacts with some q-tips, but nothing.
-
I just got this in a lot, can't find any on ebay or any in the sold listing, what would the value be of a loose copy in good condition. Also in the same lot I got a copy of burgertime but it doesn't wok, putting it in the system actually freezes my adam computer and hitting reset doesn't do anything. I tried it in my colecovision too and get a hum noice with a black screen. Are the chips dead for sure, I used a multimeter on all of the traces and they semed fine, or maybe a board swap would help? Thanks.



Atari 7800 No sound at all.
in Atari 7800
Posted
Hello, just got an NTSC 7800 console that plays fine except there is no sound at all, not when using a normal 7800 cart, pokey cart or 2600 cart. I tried adjusting the red cylinder that controls the sound frequency but no change. I think I've heard that the little clear caps on the board near channel select switch might be the cause but I wanted to be sure. Also if that is the case are the caps, that look similar, on a 2600 board compatible? Thank you for everyone's help!