bradhig1

I see mostly cbs versions of Donkey Kong JR on Ebay. Are those the same as the Coleco version?

Tried that and it still didn't work.

Allied name of the game I and II.

I just watched a video on youtube on how to fix these things. Looks like an arm with magnet in the white plastic box won't move. Have to do some soldering to get the wires out of the way.

Forgot Lloyds 801 and Lloyds 813. Also Tele-sports S 4000 and SC 8000 sold by Kmart.

I have Donkey Kong and Zaxxon. They both work on my Intellivision 1. Second cartridge that died on me after a copy of barnstorming for atari 2600 died.

I cleaned it so the contacts are shinning like new but it won't work. All I get is a purple screen ,green screen, or black screen. Is there anything else I can do to fix it?

How many of the black colored electro-mechanical games like Digital Derby , Hit and Miss , and Blip the ones I have did Tomy make?

They didn't lie I didn't read it all the way through. I know the disc spins and it tries to read it. I used a lens cleaner disc and it still doesn't read.

Disc spins but it goes to the memory card ,cd screen. Won't even play audio cds. I think the laser is bad. Head cleaner didn't help. Anyone know where I can find a replacement laser. I can't use the one from my one playstation one because the ribbon cable ripped when I was putting it in the bad case.

I got another psone slim today and had to swap the boards because the cd lid was broken.. The new one won't load games it just goes to the memory card ,cd player screen. Any ideas on how to fix it? I am sick of lying sellers on Ebay. If there are issues with a console then say so.

That's the problem with NTSC why it is something referred as Never Twice the Same Color.

I can't even close the thing up anymore. Two screw holes are stripped and the screws won't tighten.

Here is what the inside looks like. The siler box with the hole on the right adjusts the RF. I don't know what the other two do. I adjusted the RF and can't clear it up.

It is the RF switch. So is the National Semiconductor Adversary ,and the Action Games Color Game pong console. I have been on a pong kick lately.

LOL!! circuit bending the Intellivision.

Other games and other old consoles. I just tried aquaventure on my harmony flash cart and the water was purple.

I opened it up and tapped the caps on the power board no problem. If I tapped the red connector too much it would screw up. Look at those dark horizontal coming from the text. Is that normal?

The picture is snowy and one of the y shaped metal pieces used to connect to a TV or adapter broke off. I screwed in the broken wire and got the same picture as with the y shaped piece of metal. Tried adjusted rf setting under RF shield no luck. RF cable is soldering on the board.

I just got one today. It like my Radio Shack Full Color TV Scoreboard 60-3055 are designed to act like TV switchboxes. Also the Color Game Action Games by Intercon Marketing uses the same MM-57100 chip and the Color Game Action Games also acts as a switchbox as well. There is a switch on the back of the Adversary that turns on one player mode. In One Player mode one controller is used to control both paddles.

The color is off with most of my consoles. Things that should be light blue are purple now. Did some color setting get changed in newer tvs?

I struggle playing games with these weird round controller buttons. A childhood friend of mine had an Intellivision years ago with some kind of joystick attachments on top of the round directional controls. Why couldn't Mattel have used joysticks instead.

What about the Intellivision iii is that as problematic as the original master component?

Happens to other games. sometimes the picture goes black with a white line in the middle looking like it is out of sync. I thought about getting an Intellivision II but those don't play Coleco games unless there is some way to hack them to and only to get the system changer.

I thought you wanted to keep as many consoles out of landfills as possible.