FireTiger
-
Posts
2,801 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Events
Store
Posts posted by FireTiger
-
-
I have three consoles all three worked with Pacman Collection.
One was very fidgety with it but did let it play - maybe the unit was warm by then. -
I want one... nobody told me... please??!?!
-
Atari 7800.... to a wii... I did Gaming PCs though in between, also picked up a trs-80 because the one my parents had disappeared at some point.
-
very nice!
-
Would you Like a picture of mine on boot up... it really looks JUST like the JOUST except the red line.
I promise ...
20160823_215647.mp4
It's NOT upside down on my TV- the AA messageboard picture handler does that... I don't know why. -
-
So J101 was 1 pin off the previously repaired connector was NOT keyed so he didn't notice, 13Vac was hot shorted to 9Vac ... the result was the two 13V wires fusing and dead shorting from the backboard to the transformer.
So I'm down 1/3 of the wiring harness (only the blue-white wires cooked, and possibly a WPS transformer for Whitewater... *sigh* -
My husband friend the WhiteWater...
We did the lithium conversion to the battery- he tested it before screwing the board all the way in, it worked.... then-
THEN... a screw fell out... he picked it up and put it in the wrong hole - (Near the hole by j202)
He shorted the machine replaced fuses F105, F106- and we got verticle lines on the DMD and we lost music and voice...
Pulled the boards - took pictures looked them over...
put everything back in and had nothing, no power past the Power controller board (LED 7 lit) and the Topper chaser board (2 leds of some # lit)
THEN J101 MELTED!!!
Aaaaahhhhhhhhhh
-
Anyhow- the JOUST intro is normal except the red line on the far left- that might be a TV issue...
-
I think choplifter on some 7800's glitches. I have one that does and one that plays fine.
The one that plays 2600 robot tank glitches on choplifter.
cart/I have a 7800 combo that glitches- choplifter -you can find it in the search
-
Just an update for Folks: A third run of 20 carts will be done Parts ordered just need time to make them this next month. Proceeds of the Third run will be to help with putting on Cowlitz Gamers for Kids Expo and have some exclusive games at the show. For those who have purchased the game thank you very much.
I swore I read everything, I must be getting old and missed the price...?
-
Based on your info it's the connector and you need to tighten the contacts (ever so slightly)
-
put in the cart and tilt forward, if that works great.
if not tip back (still holding) if that works great...
one of these directions should work and it means the connectors in the 7800 are 'squishy' and not tight enough- there are tutorials for fixing that. -
I have a pair of these. (modded already)
-
Put that nonworking one back in and have it pushed forward (or back) and power on- if it comes up and stays you have a squishy cart connector.
Try both forwards and back-
I have over 400 carts and only one was 'bad' (it got a salt water or soda bath in it's distant past)- 1
-
http://www.atariguide.com/
left side of the screen '7800 power supply'
I have one form them and it's perfect.
They have expensive controllers, look more here. -
I think my 7800 may not like 2600 homebrews. There's a part in Princess Rescue that's impossible to pass because you get stuck if you jump at the top of the screen instead of gliding forward. I suspect Zippy The Porcupine might have control-related issues with it, as well, because it feels harder to play than one would think (I haven't actually tried it in a 2600 yet), especially compared to Princess Rescue.
Then again, my 7800 also occasionally wigs out with certain 7800 games; in Xenophobe, after a while it will randomly start acting like the fire button on joystick #2 is being held down...even when no joystick is connected to that port. So Player 2 will jump in, stand there, get killed, and jump back in again, rinse and repeat. I think I just have a weird 7800.
Check heat issues- either something is heating up and shorting closed or ???
I have a 7800 that cannot play Choplifter... the 'warmer' the console the quicker it would fail to play...
I have one that only plays 2600 games ... I guess Maria died... and I have one that plays perfectly even the 'sometimes non-compatible' ones
- 1
-
Just wanted to say I love the space invader "don't shoot" t-shirt.
I must add one to my collection. Do tell where you purchased it.
:-)
That was YEARS ago- still have it though... um...I'll look back and try to find it.
um... here's one in GBP... I'm sure they can be found
http://www.juzee.com/t-shirts/space-invaders-grey.html
Google:
"Space Invaders" "Don't Shoot" shirt
Here's another style:
http://www.use.com/Hell_Yeah_Space_Invaders_Dont_Shoot_T_Shirt_4579b8fb957550633a33#photo=1
I may have sent someone money for it a long time ago that was local to where they were being printed. neotokeo2001 comes to mind...
Why are all of them form GB?
http://www.ebay.co.uk/itm/DONT-SHOOT-VINTAGE-80S-ARCADE-GAMER-NERD-FUNNY-T-SHIRT-/221200135402
-
Hi everyone, I am sorry my intentions were not to be rude, however my comment comes off that way! OP says "him" which to me didn't appear so. I'll delete my post
Apology accepted, That was -me- as a Travi host years and years ago- I'm one of the handful of female Atari enthusiast-
(I also game both TT and PC...).
- 1
-
CUSS CUSS CUSS the lack of funds fairy!!
-
*watches*
-
...mine came nakid... hummmm
-
-
...grumble grumble... I missed this one too? Great... Can't now maybe later...
7800 Qix
in Atari 7800
Posted
I'm in for a cart let me know.