Jump to content

philgood1351fr

Members
  • Posts

    14
  • Joined

  • Last visited

Everything posted by philgood1351fr

  1. Hi friends, I'm struggling making Mozzwald cart functionning...Checked every solder (no pins are bindings together, all contacts between the PICO and card edge connectors are ok according to the schematics. But when I start My A800, or my 130XL, the card is not recognized (the green led on the card is ON). Didn't received the buttons yet, but don't think this is the cause... Photos attached. Any advice for me ? thanks anyway for this great share.
  2. Yes, I printed the manual on Ebay. And I saw the difference between left and right test pins. Pretty sure I'll put a blank scotch over the left one too as I mainly tests 5v chips.... here is the complete manual if needed. Thanks. DRAM_Tester_UserGuide.pdf
  3. Right. Thanks. I bought the DRAM tester and the Freddie Chip. ++
  4. ok thanks a lot. I suppose it's the same chip on the 800XL ? If so I'll be able to switch as I have 3 Atari 800. Thanks a lot for the tips. Phil
  5. Hi, checked what have already been discussed here with no luck so I ask you my friends for advices.... My 130 XE always boots on Memory test. the 2 ROMS are OK, but RAM is all red except 4. Unsoldered the 8 chips, put supports then tried with differents chips according to what I read here in past topics. Tried with KM 4164-B-10, TMM 41256AP-12, TMS4164-20NL chips but no luck (same results on tests). Diodes are all ok (5v). Tried to swap 1st 64 bank with 2nd 64 bank by crossing resistors R110 and R111 but black screen. Anyone can help on this ? Are my replacement chips are the good ones ? I checked the MT4264 voltage, and notice that I have 5v on some pins and 3.6 on some other. Even 1 pin (pin 3 or 4 that have 1.9 and this one has a dropping voltage during the Ram test). Anyone have the correct voltage for each memory pin ? Thanks for your advices. Phil
  6. Yep. Then I design, print a case and send it back to you. tell me in private message.
  7. Will design one as soon as I received mine.....Hopefully you'll be able to release this Gem ? Greatly appreciated that kind of development initiative. Great to keep our old computers alive. So if you need help, I'm here for casing.
  8. Hi, received mine today. Works great but only with original power supply on the console and dragonfly on separate PSU. Maybe my Dragonfly PSU meaning as it has only 500Ma. The screen is flickering, black, with sound in that case. Does the 500Ma could be the cause ?
  9. Hi friend, I'd like one Dragonfly + additional option, Pokey Max + additional option YM2151 module . Expecting news from you for payment and shipping. Great Job. Thanks. Phil
  10. Hi friend, would love to order one. is there any still available ?
  11. Hi firends, I'm a bit confused about downloading the Offline roms to the cart. I tried 2 methods without success. First of all, the card is well connected and online roms working great. Plustore Account is ok and well recognized by the card (Icon is full on upright side of the screen. I place a rom file in the Offline directory on the plustore app, in the card menu went to Download offline roms and the screen turn to blue with the (+) icon rolling. But after 30 minutes, still rolling... reset, then tried with a TAR file in the offline directory, no success too. What am I doing wrong ? is there anything more to check/do ?
  12. Thanks Al Nafuur. I use the Web client. gonna try with the App because can't do it by the web page. thanks for your help.
  13. Hi Friends, is there any way to reset the Offline directory on the plusStore website ? did a bad mistake and it's full and not possible to erase files/directory... sorry for that. Thanks
  14. Hi friends, I recently acquired this very good SIO2SD hardware. Working very well to launch disk (ATR, XEX) from the menu on Atari 800XL, and assigned from D1 to D8 some of my favourite games. But my question : Is it possible to lauch straight images of ATR/XEX attached to D2 or D3 or...D8... without launching the Sio2SD.xex loader ? Did try to choose D2 or D3 on the OSD, then cold or hard boot the Atari but still loading D1 attached image. Thanks for your help. ATARI 800XL SIO2SD firmware 3.1 RC2 ++ Phil
×
×
  • Create New...