Jump to content
Have You Played Atari Today?
2600|5200|7800|Lynx|Jaguar|Forums|Store  

adolobe

Banned
 View Profile  See their activity

  • Content Count

    258

  • Joined

  • Last visited

Posts posted by adolobe

  4. Posted · Edited by adolobe

    I have for sale an Atari Lynx Howard Development kit. I've had this for many years now and I no longer have an Amiga so I have no way to test it. It worked the last time I used it and it has sat on the same shelf since. But its build like a freaking tank so its probably ok still. I do not have the Handy portion however.

     

    Not really sure what these are worth these days. The serial number is 38

     

    This is now on ebay

    post-5140-0-82165600-1354856252_thumb.jpeg

    post-5140-0-62583600-1354856263_thumb.jpeg

    post-5140-0-40247600-1354856273_thumb.jpeg

  9. Posted · Edited by adolobe

    I have for sale a Philips Magnavox CDI 550 with a new Time keeper battery and Laser. System has been cleaned and well taken care of. It also comes with the Digital Video Cartridge and the following games.

     

    Space Ace

    Little Devil

    Burn Cycle

    Dimo's Quest

    Philips Demonstration Disk Hotel Mario (full game)

    Philips Demonstration Disk Link - The Faces of Evil (full game)

    and the Movie Top Gun

     

    $125 plus shipping for Priority Mail.

    post-5140-0-48154000-1354599217_thumb.jpg

  10. Posted

    You can get the firmeware and some other useful information from Darkfadder

    http://www.darkfader.net/gp32/

     

    A Jtag diagram and flasher that is easy to build and use from Cobbleware

    http://www.cobbleware.com/gp32/gp32jtag.html

     

    Now the kicker is you will need to find an old Samsung cell phone usb data cable to hack off the port or you will need to solder the cable directly to the gp32 board

    mobile phone connector / data cable (NOTE: charger-cables might not have enough pins to be useful!!!):

    - Samsung R200 / R210

    - NEC N21i

     

    I cant seem to find the solder location information for the motherboard direct Jtag locations as its been about 3 years since I last used the information. Im sure its online still

  11. Posted

    Most likely the system has become bricked. The Rom chip in these go bad easily. You can build a Jtag cable and reflash the rom as long as it has a charge it should boot with the reflash but once you reboot it will brick again. But this will tell you if it's the rom chip or not. Either way its a easy fix. I've done about 5 over the years for members on gp32x.com.

     

    I no longer have a computer with a parallel port or I would offer assistant

  13. Posted · Edited by adolobe

    I have a complete in Box like New GP2X Wiz. I purchased this last year New and only played with it a few times, mostly PSX game. Once I got an Open Pandora I stopped using it and it has sat in its box since. Battery holds full charge and I even checked out the latest PSX emulator which plays most games at full or near full speed. There is also a wealth of classic console emu's for it as well listed below. Once great thing about the wiz is that it can be played outdoor in full sunlight.

     

    My wiz overclocks to 799 still has the original Screen film from manufacture

     

    Asking

    SOLD

     

     

    Computers

     

    Amiga (UAE4ALL)

    Amastra CPC (Wiz-CAP32)

    Atari ST (outcaST)

    Commodore 64 (Frodo)

    Commodore Computers (PET, 64, 128, c4++, etc.) (Vice)

    DOS (286, 386, 486, etc.) (Dosbox/Game-Specific Configuration Files)

    MSX (Wiz-MSX)

    Sinclair ZX80/ZX81 (sz81)

    Texas Instruments TI-99 (Wiz-TI99)

    SamCoupe (Wiz-SIM)

    TO7-70 (Wiz-THOM)

    ZX Spectrum (GP2Xpectrum)

    Home Game Consoles

     

    Atari 800/130/5200 (Wiz-Atari)

    Atari 2600 (Wiz-2600)

    Atari 7800 (Wiz-7800)

    Colecovision (Wiz-Colem)

    Sega Master System/Gamegear (AlexKidd2x)

    Sega Genesis/Megadrive/Sega CD (Picodrive)

    Capcom Play System 2 (CPS2Emu)

    NeoGeo CD (NeoCD4Wiz)

    NeoGeo (GnGeo) (Works well with TV-Out!)

    PC-Engine (Temper)

    Sony Playstation (PCSX4ALL)(Temporary Download Link)

    Nintendo Entertainment System (GPFCE)

    Super Nintendo Entertainment System (PocketSNES)

    Vectrex (Gex2x)

    Intellivision (Wiz-Int)

    Handheld Game Consoles

     

    Gameboy Advance (gpSP)

    Gameboy/Gameboy Color/Super Gameboy (Lemonboy Or Ohboy)

    GP2X F100, F200 (Ginge)

    Neogeo Pocket (R.A.C.E)

    Wonderswan (WizSwan)

    Sega Gamegear/Master System (AlexKidd2x)

    Arcade Machines

     

    Capcom Play System 2 (CPS2Emu)

    NeoGeo (GnGeo) (Works well with TV-Out!)

    Sega System 16, Sega X Board, Capcom play system 1 & 2 (FinalBurn Alpha)

    Multiple Arcade Machines (Mame4all)

    post-5140-0-45966000-1348082138_thumb.jpg

  14. Posted

    Its probably a voltage problem if I had to guess. Are you using an official Atari ac adapter or an original Sega Gen 1 ac? If you have one of those cheap adapters that are so prevalent on ebay these days it will cause issues such as that on some games and on a small number of Jaguars. I have 3 jaguars and one of them will do graphic issues when not used with an official AC form Atari or Sega on a couple games. Checkered Flag, Cybermorph etc

  15. Posted

    I have 12 issues of ST Format magazine with the corresponding Cover Disk's for each issue. Most issues are in mint condition a couple do have small cover damage but all the inside pages are mint.

     

    These are pretty heavy clocking in at 11.8 pounds. Asking $60 shipped domestically in the USA, sorry no international shipping do to weight

     

    Issue's

    11

    12

    14

    17

    18

    22

    23

    25

    26

    35

    38

    39

     

    Paypal payment only shipped Media Mail in cardboard box.

     

    th_IMG_38331.jpg

  16. Posted

    Im posting this just in the sake of archiving for possible trouble shooting in the future. Hopefully it can be of help for someone down the road.

     

    This is an easy fix requiring zero to basic skills. The help of a multimeter and soldering iron is optional.

     

    I recently picked up a Jaguar unit that was having sound issue ( in this case extremely low sound). I later fixed 2 other units that had no sound with this same method.

     

    The culprit in all my Jaguar units was the REG1 chip. its located down and to the left of the DSP. This chip regulates the Jaguar voltage to 5v for the sound system. In the case of the low sound system it was only putting out 1.3v and in the other jaguar units it was putting out 0v. This photo is after I completed the project.

     

    th_IMG_37831.jpg

     

    Test with a multimeter

    You can check this on Pin1. If you do not know how to look at a chip and determine Pin1 its the one with the small notch on the top of the chip beside it. In this case its the bottom row left furthest pin. You can confirm if power is going into the chip set with Pin 8, this is the pin directly across from Pin 1. It should be 9v but depending on the accuracy of your multimeter it may be slightly higher or lower.

     

    Test with out a Multimeter

    If you do not have a multimeter you can still check to see if this chip is the culprit. You need about 8 inches of wire cable. You can sacrifice a CAT5 cable or any other old cable for this. Strip off about 1/4 on each end of the wire.

     

    Now you need to access a source of 5v on the Jaguar motherboard. The Jaguar AV Port offers just the source.

     

    Behind the Jaguar Cartridge port locate (L7)

     

    th_IMG_37851.jpg

     

    Take one end of your wire and touch it to L7 the silver part only and the other end to Pin1 on the REG1. You should now have sound. If not then your culprit could be more severe but less likely.

     

    Now if your handy with soldering iron solder the wire in place at both contact points. Optional you can firmly tape the wire down at both locations with some electrical tape. Third option is to pick up some conductive wire glue and permanently glue the wires into place. Conductive wire glue runs about $5.

     

    Below is a few photos of the finished project on one of my Jaguar's. FYI this does not hinder the AV port so if you use Composite or Svideo you are fine as they do not require the 5V lead.

     

    th_IMG_37861-1.jpg

     

    I ran all 3 Jaguars for 36 hours to test. One was playing Fight For Life, One was playing Cybermorph and the other one was playing Rayman.

    • Like 6

  18. Posted

    I have an Atari 1050 thats supposed to be modified with HAPPY. I dont have any of the original software to verify if happy is in fact installed. But the guy I bought it form said it was. Because I cant verify it personally it is sold with Money Back Grantee. If you buy it and verify it does not have happy I'll refund you the full price with shipping and pay to have it shipped back to me.

     

    Asking $100 shipped in the usa

  19. Posted

    Atari 800 with a 1050 Disk Drive all power cables, monitor cable and floppy drive cables are included.

     

    Also comes with 10 random 5 1/2 floppies with software and games.

     

    Following carts are included

    Frogger

    Spider City

    Movie Music Madness

    Koalapainter

    Sesame Street Letter-Go-Round

    Atari Basic

    Atarigraphics

     

     

    $100 plus actual Shipping

    post-5140-0-70149600-1334102476_thumb.png

  21. Posted

    I have two 1040 STF's both of them I picked up last year in a large lot. When turned on and plugged in they only put out a white image. Not sure if its a simple fix or not. Someone said they need a new TOS Rom but that was just a suggestion of an Atari Forum.

     

    Asking $50 plus what ever it cost to ship.

    post-5140-0-23414800-1334100728_thumb.png

  24. Posted

    I have for sale in great condition a Panasonic FZ-10 3do system. Comes with all hook up sand two controllers. Also comes with the following games

     

    KillingTime - complete in box

    Phoenix 3 - complete in box

    Virtuoso

    Star Fighter

    Slam & Jam

    Rise of the Robot

    Trip'd

    Olympic Summer Games

    Deadlus Encounter

    Burning Soldier

    Pataank - cd only

    Way or the Warrior-cd only

    Total Eclipse-cd only

    Dragons Lair-cd only

     

    I would Prefer a member on AA get this than someone on Ebay. Great system

     

    Asking $60 + 12 shipping i accept Paypal will ship to Canada but shipping will be a lil bit more.

  25. Posted

    Here is the hard to find japanese PC-FX 32 bit system made by Nec the same company that brought you the Turbo Grafx 16. This system is hard to find in America, you usually have to pay insane shipping prices to get one on ebay from japan. This comes with the hookups/chords to connect to your tv, 1 controller, and 10 games.

     

    The games are

    Galaxy Fraulein Yuna FX

    Fire Woman Matoi-gumi

    Team Innocent

    Anime Freak FX volume 3

    Battle Heat

    All Japan Womans Pro Wrestling : Queen of Queens

    Power Dolls fx

    Neo Generation FX 2.

    Super God Troopers (HK Copy)

    Zenki FX (HK Copy)

     

    Everything works great and is in great condition. This is a great system for any collector. I would prefer to sell it to a member on AA than on ebay I'm asking $140 shipped to USA, CANADA, or Mexico Payment with paypal

     

    post-5140-1168280942_thumb.jpg

AtariAge
Forums
Store
General
Follow AtariAge

Copyright ©1998-2021 AtariAge

×
×
  • Create New...