rj1307

@Barral, ComLynx has nothing to do with the type of cartridge. So yes, you can use several consoles with AgaCart and ComLynx will work.

I am not home until the end of this week, I will send a message on Monday.

It's good in your photo.

If you present the game locally (this is not a competition) and you do not share files, you can submit it to Silly Venture. It would be best if there were no video reports

According to the rules, work exhibited on Silly Venture may not take part in another competition before. It can be shown on another party, but it cannot be shared on the internet. And I have no influence on it, these are the rules set by the main organizer of the meeting

Here is a special video invitation to participate in Silly Venture presented by ...... watch it yourself

For anyone who takes part in the competition but will not be in person at the party.

I am very happy that you want to create something for Lynx, it will be a great ending to the 30th birthday I remind you only to register at [email protected] and to send me a message with the size of the shirt

About halfway through this site http://sillyventure.eu/en/news there is information about two categories, and this is current. Because of Lynx's birthday this year, we split these categories because there was only one common category so far. In answer to the second question, of course you can do what you want with your game, but remember that the game file will be made public on pouet.net and demozoo.org

SUZY in Lynx I and Lynx II are identical.

Silly Venture 2k19 T-shirts hit the prize pool. On the back of the shirt are hand-written greetings from the creator of Atari Lynx - R.J. Mical. People who take part in the competition for the game / demo and will not participate in the party, please send me a message by the end of October with information about the size of the shirt (XS ... XXXL) so that I can reserve the right one. Size chart below.

Igor, the rewards don't really matter. You could motivate people even without them, you are a well-known and respected person for your contribution to promoting Lynx. I don't have "power" like you and I'm trying to do it with rewards.

A small update, I send photos of the main awards, maybe they will inspire someone to work

Will be available on Tuesday, I will send a message to those waiting

Yesterday I did the same, cut the path leading to the capacitor on the left from the MENU point.

@NAMSS Gamer, I sent a message.

Sure, you can do it

I am sending STL files, maybe they will be useful to someone. My printer is Prusa i3 MK2.5 + MMU2.5. @Zitruskeks, if you want I will send a new cartridge shell . stl.zip

The elements you have chosen are OK, although I always exchange for a 1W zener diode https://www.tme.eu/pl/details/zmd4.3-dio/diody-zenera-smd/diotec-semiconductor/zmd4-3/ You could damage the diode by soldering it to the PCB. Check the voltage between pin 7 and 14 U11 if the voltage is 5V.

D13 NOK, desolder the diode and measure it outside the plate. Measure the place on the PCB where the D13 diode was.

I just meant this measurement Set the meter to measure the diodes and measure the diode D12 and D13 in both directions, i.e. first the red end of the meter on the left and then on the right. Make a note and give me the values. Set the meter to measure resistance and measure resistor R74. Set the meter to measure resistance and measure the value between pin 7 (GND) and pin 14 (VCC) of the U11 chip.

Well then you have bad. If you have a jumper on like in the picture then you can't have 12V on pin 13 U6. You may have a damaged connection between the keyboard connector and pin 13 U6 and point TP17, check it according to the pictures. Check that the resistor R68 has 270kOhm.

You don't understand me because you can't have these voltages with both jumpers unless you have a damaged path from the keyboard connector. The first picture shows a jumper that simulates pressing the ON button. This eliminates damage to the keyboard. The second jumper emulates the insertion of the cartridge into the socket, allows checking that the contacts in the socket are functional. Please, put both jumpers on, connect the power supply and measure the voltage again. Second request, can you take a photo of the U6 area?

All chips except U6 have this mass: Also remember that a lot of pins are connected to all chips, e.g. data lines and address lines, so the measurement will not show which chip is the problem. Where do you live? I can repair your console, but I don't know if the shipping costs would be too high.

I do not understand why you want to measure minus battery and not GND mass after stabilization circuit? After all, each such measurement will pass through the transistor's drain source. The second thing, I remind you that your console and the vast majority of Lynx II has a Hayato processor and not Mikey, and they are not interchangeable!