rj1307

Sorry, the second picture should be different: And resistors R72 and R73 check that they have the value according to the diagram.

My suggestion is this: put on a jumper as in the picture, connect the power supply and compare the voltage on U6. 1- 4.6V 2- 4.4V 3- 4.4V 4- 4V 5- 4V 6- 4.4V 7- 0V (GND) 8- 4.4V 9- 4V 10- 0V 11- 8.4V 12- 8.4V 13- 0V 14- 8.4V (VCC) Check R72, R73 and C43 (there is no short circuit). If you have access to the cartridge socket, make a jumper instead of inserting the cartridge.

You are wrong, I asked a colleague @ bobmoo79 to check the voltages on individual U6 pins in order to diagnose where the cause is, but this has not been checked. The advice was not to "replace Q8" but to check that the switching system works.

You can always send me and I will revive him Do the tensions I gave agree? Do they change when you press ON on pins 1 and 2?

@karri, I paste the answer of the main organizer, Grey's: > "Does the Silly Venture have some special mascot, graphics or tune? Well, not really Every edition has different tune, logo/graphics - in the attachment is the current one (SV2k19 logo). > there some theme that sets Silly Venture apart from other events. > Like strong demo scene? Electronic music? Hmm, just to name a few: "the biggest amount of worldwide ATARI visitors - over 200!", "Atari Related Prizes", "Endless Compo Night - over 100 submitted entries for all possible Atari platforms each year", "Unforgettable Concerts powered by Atari consoles/computers" etc etc. Unfortunately, there are no such categories. If anyone wants to exhibit such work, they will be exhibited in the category "Demo" with the annotation "4k", "Intro" etc.

Our last Atari Lynx game competition is still being talked about and I would like to invite you to the next one! This year's December Silly Venture event organized in Poland will be devoted primarily to the 30th anniversary of the creation of Atari Lynx. On that occasion, I'm inviting you to take part in the competitions in two categories: "Lynx Demo Compo" and "Lynx Game Compo". The attractive prizes are waiting for you! The first place, in a given category, will be rewarded with the Atari Lynx II console with a new fantastic LCD screen BennVenn + AgaCart + power supply + ComLynx cable, all in the special packaging. There are also other interesting prizes for second and third places. All in all, you can win two sets of consoles! In order to win the prizes, you don't have to participate in the party. You just have to send your application to the e-mail: [email protected] and then send your work to the same address. In the competition may take part in unpublished works, ports from other platforms are possible. The voting will take place on 7th December and the works will be evaluated by the participants during the party. All the prizes will be sent to the winners to the indicated address. The deadline for submitting the works is 30th November 2019. All the works will be presented on a Lynx II console connected to the projector through the VGA output. The details of the competition regulations are available at http://sillyventure.eu/en/compos I also invite sponsors to support our event.

1. insert the cartridge and connect power to Lynx, do not press anything 2. connect the meter to pin 7 (GND) and pin 14 (VCC) of the CD4069 chip, check if it is 9V 3. Connect the meter to pin 7 (GND) and pin 11 and check if it is 0V 4. Connect the meter to pin 7 (GND) and pin 10 and check if it is 9V 5. Connect the meter to pin 7 (GND) and pin 1 and check that it is 9V 6. Connect the meter to pin 7 (GND) and pin 2 and check if it is 0V 7. press ON and check if the voltage between pin 7 (GND) and pin 1 has changed to about 4.5V 8. connect the meter to pin 7 (GND) and pin 2 and check if it is about 4.5V If the voltage on pins 1 and 2 does not change after pressing ON, replace the Q8 2N3906 transistor.

Karri was right, it was an older version, I didn't even know it was newer

I downloaded and converted the file again, check it. Assembloids.lyx

Assembloids works properly on AgaCart + Lynx II, friend UHATEIT has a problem with the game on Lynx I. The conversion from .lnx to .lyx was also trouble-free.

When changing 128k >> 256k using the Mateos tool, only the file converted by EPYX will work. Mateos describes this tool as follows: "For 256 KB cartridges select Remove Header Only. In case it is a 128 KB file, select 128Kb –> 256Kb (EPYX/Mateos) as your best bet. Files smaller than 128KB should select the (BLL/Mateos) option or when the EPYX option didn’t work."

I upload here a .txt file with a description of what I did when converting each game. Of course, this can sometimes be done in several ways, but it can be helpful. conversion.txt

I am sending the current version 4TTUDEv2.lyx

AgaCart supports 512k OnDuty.lyx

On Duty version 512k works without any problems Is there currently a difference in gameplay between the 256k and 512k versions? OnDuty.lyx

Thanks for the correction, now it works fine findaway.lyx

UHATEIT, If I sent a parcel without the required signature, it would be treated as unregistered, without a tracking number and without compensation in case of loss. Using another carrier would increase the price of the shipment several times. power Two games do not want to run on real equipment, I reported this to AtariGamer.

But this previous case is related to power modification, while the arcanehacker colleague consoles are not modified. I am sending the second piece of the cartridge for testing, we will see if it changes anything. I have another case of the cartridge not working, who will guess what modification in this console damaged the SRAM memory in AgaCart?

I do not want to worry you, but it will not improve after replacing the diode and transistor, these screens are so damaged. I have several pieces so damaged.

And in the attachment .lyx file. mk2.lyx

I have updated the list, you have to wait a few days because the ordered PCBs have not yet arrived.

I added prices in USD

You have been added

You're right, I sent the wrong file with the instructions, now it should be OK AgaCart.zip

In the attachment a new version of the software and a new manual translated by a colleague - ^ Cro§Bow ^ -. I have changed two things - now you can put any number of subdirectories and files with any extension on the SD card, the cartridge will see only those with the extension .lyx. The second change involves a different operation of the quick start function, for details, please refer to the instructions. To update the software, save the agacart.bin file to the SD card, start the console and wait for the letter "P" to stop flashing. There will also be two letters "EE" and this is the correct behavior. After the update, delete the software file from the SD card. AgaCart.zip