Jump to content

atmn

Members
  • Posts

    303
  • Joined

  • Last visited

Everything posted by atmn

  1. I checked the A2600 core specific settings and all I could find was video system settings (PAL/NTSC/SECAM/AUTO) and swap controllers and enable atarivox...something. Maybe there is a way but I could not find it.
  2. I dont know, but I have had not as much problems with the famicom port, if any that I remembered. Famicom games tend to be cheap and... dirty.
  3. Heck.. I ordered a v2 even if I own a v1. Played some on my NtM yeserday with my N8, (for save states) and I had to reinsert the cart like 10 times before it booted correctly. Hopefully I can sell my v1 and get my money back from that at least. I do not demand a huge profit.
  4. Ye, quite a big deal. I belive the buyers now assume they can hit it with the jailbreak for the sweet extra cores..
  5. AND updated UI. Something with the software has been changed. Remembered that Kevtris said once that he ran out of gates or something on the NtM and he had choosen another FPGA if he could pick again. I can very well be wrong. Its a big question tho, will V1 and V2 have compatible firmwares..
  6. Can anyone confirm that the firmware between v2 and the original Nt Mini are compatible, thinking about the JB-fw. Also if the GUI is compatible with v1.
  7. Think HiDefNES had interpolation up to 3.0, then it was removed. Think the scaler is give or take equal to NtM. This is the mentioning in the 3.0 HiDef changelog regarding this. Are there not enough gates left in the FPGA to implement interpolation properly or why?
  8. The one issue I have with my NtM is the cart slot. It can take a few tries. Think there was "problems" with dreath grips on clone consoles back then and I think Analogue over comensated to this to the point the problem was the opposite. My NES2 have a perfect balanced cart-slot, never a problem with any cart.
  9. Since its only a pin converter it should be some pin thats fauly wired, what else could it be? Nothing that can be patched with a FW upgrade, something connected to +5v or GND that shouldnt?
  10. I hope this last batch NtM will get some traction on the firmware fairys intv core. Are there any intv core at all out in the wild?
  11. Yes. It would be crazy. Analogue signals on a CRT is quite forgiving. Would look terrible if converted to HDMI. Since the very least a composite signal is available somewhere on the old consoles thats the minimum for most scalers (retortink2x/XRGB mini)
  12. LEMME PREORDER! ehmem.. no rush, I have plenty of games to play meanwhile..
  13. Would be nice to get combine shipping for those who pre-ordered the DAC and ship them all at the same time. TBH, I could wait and ship the Pocket in the same package. It would be best to get a analogue.eu shop based somewhere in EU. (with some +% extra cost) but fair shipping.
  14. Does someone have the schematics for the HD-15 Connector? Cant find the one from the FAQ from the Nt Mini. I suppose its the same. I wanna start making cables. I guess the signal cables should add 220uF caps or are they inside the DAC?
  15. Sure thing, never questioned that, but that has nothing to do with the 32x support, the only thing this adds to the table is making 2 setups redundant. Maybe its possible to play 32x games directly from SD from a jailbroken firmware? With a 32x attached of course. That would be relevant at least.
  16. Kind of cool in a sense, but its like the same as having an original Mega Drive hooked up with an RGB CRT. I would be hyped if this setup was possible with HDMI-out.
  17. Ye, I got totally screwed on this one. Ordered a NeoSD and a SSDS3 from them while they still shipped from Spain, I honestly thought they still shipped from EU. Don't know why Andorra? Better for US customers? As a swede, Im used to being tax-robbed, not the end of the world. Next time I'll wait for some German site or something. And next time I'll for sure will support my dear country with some more tax is for the DAC. Any info what happens if using it with some HDMI switch? Could it work with a passive physical switch?
  18. Exactly the same for me, took 10 days for the tracking number to get active, then it took 2 days to Sweden. AND 80USD in customs and fees since its outside EU. MUCH better for me if they still shipped from Spain. I would wait next time to get a TO product to a EU reseller... if they make something more fun to have.
  19. Confirmed fw update work on the SNt maybe a sign that they will add the analogue adapter to the upcoming version. Suppose it will plugin and the system detects it and there might be a new menu option.
  20. Wishlist: SNt update. SNt NES Cart adapter. SNt+MSg Analoge adapter. Intv core for NtM. Cart adapters for NtM. Turbo Nc ?
  21. Probably working with the next project.. Please god say its the DAC.
  22. I wonder how do I configure Width/Height for my Sg/Super Nt when I put my monitor in 4:3, using 720p since I sometimes wanna use scanlines. Kind of wanting the monitor set to 4:3 since the OSSC wanna go full widescreen, dont wanna toggle each time. Now Im using 720p@60, Width 4X. 5X seems to wide, 4X feels thin. What is "correct" ?
  23. No schocks here either, US version. Using this to power the Sg: https://www.ikea.com/se/sv/catalog/products/90280826/
  24. The 8bitdo SN30 Pro, works decent. BT feels out of the question, quite laggy from times to time. Only using it wired. Thing is I wanna have the option to play with the original controller. If I cant, the zero-lag-100% accuracy aint worth it. The MiSTer needs controller adapters for original controllers, connected to the serial I/O.
  25. Hard to say. Mainly I think its the controller "issue". The only system I've played for a longer time is the Amiga core.
×
×
  • Create New...