thebruto1

okay atmn - thanks!!.. In that case I might go to an electronics parts store tomorrow and try to purchase the parts and ask them for some advice will let you know if I have any success it goes to show you how much I know on the subject. I thought your were talking about inside of the console

mmm thank you for your reply atmn... I thought that might be the case from your earlier posts .. honestly I am absolutely horrible with messing around with hardware I wouldn't feel comfortable opening mine up to do something like that give the $$$ Ive sent analog another email - its a shame that this couldnt have been worked out while they were building it. considering the option of both outputs is one of the main selling points for $500usd and $30 for the cable youd expect just to be able to plug it in.

Hi was wondering if any kind soul might be able to offer me some advice. I have a European CRT (Grundig Lenaro) that has two Scart inputs at the rear. I have hooked up other consoles like master system, mega drive, french n64 all no probs I purchased the recomended scart cable from retrogamingcables who I have used before never had an issue. I have left default setting CYSNC as advised. tried both NTSC and PAL for tv setting and no matter what I do all I get is a pure white blank screen. I loaded a nes game on my HDTV then changed the plugs over. I can hear the audio but still the same no picture just white. Analog told me to go back to the cable maker who replied to my email saying "...your TV is expecting a 1-3volt signal from SCART pin number 16, as this tells the TV its in RGB mode. Unfortunately the Nt mini doesn't output this signal from the console via the AV socket. Are you able to manually select RGB mode using your remote control? " now the manual settings on the TV are only RGB OFF. PIN8+16. or PIN16 without the PIN16 which apparently is not in the analog mini RGB wont display on my TV. and RGB off also does not work as the cable is an RGB specific cable so it wont change to another type of picture (for example composite) Is there anything I can do?? has anyone else had this problem on their CRT??? THanks everyone and thank you to kevtris for all your hard work