Jump to content
Have You Played Atari Today?
2600|5200|7800|Lynx|Jaguar|Forums|Store
Warnings about File Attachments - Please Read!

piomet

Members
 View Profile  See their activity

  • Posts

    16

  • Joined

 Content Type 

Everything posted by piomet

  1. piomet
    Yes, that was 4050 dead. Jessie is back
  2. piomet
    1) pal 2) yes, but I soldered 15pin at 4050 to connect with GBS-8200 to get sync signal. Maybe I've shorted and damaged sth.? 3) Stock output worked before on my tv 4) I'm using vga on this same tv with Sophia RGB and it's ok
  3. piomet
    Hallo! In my XE there is no video output(chroma/luma) , but system works normally and Sophia output is ok. Checked also with another GTIA. Any suggestions?
  4. piomet
    Does it works with TKII-stereo if I will patch a PIC with the new soft? thx.
  5. piomet
    Yeah, My Atari has really spaghetti wiring inside. Ultimate, Sio2SD, TKII stereo, Sophia and Covox. All packed in ITXcase. Thanks a lot for yours help!!!
  6. piomet
    I added resistors 30k on covox l/r out, and sound is quite ok by covox and pokeys There's a little hum noise from genuine atari audio circuit. But it's evident I think on majority stock Atari.
  7. piomet
    What kind of diode should I wire?
  8. piomet
    Thanks a lot!!!
  9. piomet
    Connections I've made are correct for sure. I've connected covox to cpu pin39, too for check the difference. But distorted sound is only when pokey and covox outs are connected together to common amp input. It looks like covox signal is stronger than pokey. I've tried to put resistors on covox out but it doesn't helps.I'm not enough strong in electronic to know how to fix that.
  10. piomet
    https://lotharek.pl/productdetail.php?id=192 Instalation of this covox is very simple. in my opinion. It's socketed under PIA. I've no idea what goes wrong. I've another one problem. Maybe somebody could help me. I connected covox and pokey to one output and sound on amp is very distorted. Separately it's all ok. Now to play covox/pokey I must switch cable to two joints.
  11. piomet
    Hi! I have mounted Lotharek's Covox on the board.It's a great piece of hardware, but I'm switching covox to disabled in ultimate setup and covox still works. Any ideas?
  12. piomet
    Hi guys! I have instaled Ultimate, TKII stereo and Sophia. What can it be that I can't go in ultimate setup by help key? After power on, SpartaDOS is starting. I can go to BASIC by BASIC command. If I go out by BYE test ram is starting and HELP key (exit) doesn't work. WHy Help doesn't work? I've tried to connect 4 and 6 pins on keyboard matrix but it doesn't work. This happend after instal the Sophia upgrade.
  13. piomet
    It is solved. I removed only c78 on atari board and it helps.that is ok.sio2sd works fine. removing c77 extra makes sio errors. Is it possible to use tkii arrow keys as normal joystick? Will be an update of mousetari project? What changes in 2.0 firmware?
  14. piomet
    Is there info if sio2sd works without problems with TKIIstereo board? I've TK-II stereo board mounted and I can't mount any atari image by Pajero configurator ver3.5. It should be that I pressed '1' key for example and image is mounting to D1, but it doesn't work.
  15. piomet
    Hi! I'm switching off stereo in Ultimate setup but Stereo LED is shining still. Is that ok? Is that depend on Ultimate rom's version?
  16. piomet
    Hi everyone! Works TK-II interface with ps2 mouse? Or with keyboard (2 keyboards) only? Sorry for my english.
AtariAge
Forums
Store
General
Follow AtariAge

Copyright ©1998-2023 AtariAge

×
×
  • Create New...