Atari 810 US vs UK...any difference?

[Atari 810 US vs UK...any difference?]

6 hours ago, Fred_M said:

Not all 410's have a hard wired plug. There are 410's out there which need a separate 6v power adaptor.

Are you sure they aren’t just European 410s? All 410s over here (UK) use the separate 6v adaptor, but all the 410s I’ve ever had from the states have been hard wired.

[Atari 810 US vs UK...any difference?]

3 hours ago, Sugarland said:

 The US version has a tomato chip. The UK version has a tomato chip.

I’d better call the whole thing off!

 

Thanks all, I’ll get one without the brick, good to know power is a separate unit on US 810s! Always seemed odd the US 410 has a hard wired mains plug.

[Atari 810 US vs UK...any difference?]

Hi all,

 

I'm thinking of picking up an 810 to go with my 48k 400 (which has a working 410). They are really rare here in the UK so I was wondering if there are any differences between the US and UK versions beyond the voltage?

 

Thanks in advance for any tips!

 

[Broken pins in 400 data socket.]

I’ve just bought a dead 1010 on eBay for £9 which has 2 good sockets on it! 

 

 

[Broken pins in 400 data socket.]

Just now, Mr Robot said:

there would be 3D printed sockets available by the end of the week!

 

 

I have a 3D printer too, I'll keep en eye out for the right gauge pins!

[Broken pins in 400 data socket.]

Hi all,

 

I've had a missing pin for ages in the data port at the side of my Atari 400 (where the disk drive or cassette plugs in) and it still worked...but now another has dropped off through wear and it no longer functions!

 

Is there;

 

A. An off the shelf replacement for these sockets.

B. A tutorial in making and soldering new pins.

 

I really don't want to spend the next year looking for a donor computer!

[800xl Memory test - All green, but only 40 boxes?]

yep, got the sticky option key to work now (someone probably spilled a can of Quatro on it in the 80s), scanning the full amount now. Was using the BYE command before which was running the test without freeing basic memory.

[800xl Memory test - All green, but only 40 boxes?]

Ahh ok! I'm too used to my 48k 400... not up to speed with this modern technology!

 

Presumably because I initiated the test from basic using the BYE command? The option key is a bit temperamental but I'll keep jiggling it until it works.

[800xl Memory test - All green, but only 40 boxes?]

I've just noticed that typing ?FRE(0) also seems to return 37902... the correct number for a 48k machine! Did Atari release 48k XLs in the UK?! Or do I just have some missing memory?

[800xl Memory test - All green, but only 40 boxes?]

Hi all,

 

I just picked up an XL cheap. It all seems to be functioning and I was planning to refurbish and clean the case and keys. But I'm getting an odd result on the RAM test. Only 40 boxes appear, all green, before it loops round and re-tests each one.

 

Does this mean a chip is completely missing?

 

[New Hardware: Atari 400 RAM-Card 48/52 KB & external OS-ROM]

Memory card and video card both installed! 400 now thinks it's an 800

[New Hardware: Atari 400/800 Super Color CPU Card]

Just finished my install of this and the memory upgrade.

 

400 is now happily running Mercenary, Escape for Targ with a beautiful sharp image!

 

These were a must have for me as I really wanted (most of) the capabilities of an 800, but really love the design of the 400.

[Help needed to upgrade 400 to 48k]

There's also this 52K RAM card for the 400, all of the first batch are sold but there should be more made depending on demand.

 

http://atariage.com/forums/topic/267042-new-hardware-atari-400-ram-card-4852-kb-external-os-rom/page-1?do=findComment&comment=3791461

 

Thanks for the heads up! I now have both of his cards installed - 48/52k card and his amazing s-video CPU card (wow, crystal sharp image now!). My 400 now thinks it's an 800!

[Help needed to upgrade 400 to 48k]

http://atariage.com/forums/topic/109732-atari-400-48k-memory-upgrade/

 

Been a looooong time since I did one of these but I think the pdf in the thread above may have been what I used. The factory kit was much easier.

Thanks, but that's the piggyback method I'm trying to avoid. According to the guy supplying the kit I've pictured you can simply pop the original chips out and replace, not piggyback solder on top of the original chips.

 

Here's the link to the kit. Says you replace chips, not piggyback. But sadly not available to me in the UK.

 

http://www.ebay.com/itm/Atari-400-48k-RAM-Memory-Upgrade-Parts-/222663061346?hash=item33d7c0af62:g:DnwAAOSwCU1Y4WoV

[Help needed to upgrade 400 to 48k]

Hi all,

 

I have a standard UK PAL 400 with 16k and I'd really like to upgrade to 48k. Sadly Best Electronics ran out of their upgrades a couple of years ago so I only have a few options left!

 

1. Is anyone selling an upgrade kit to the UK?

 

2. If not, then can anyone help me source the components and instructions I need? I'm not keen on the work/risk involved with the piggy back method but I've heard that, as I have a socketed board, I can simply replace the chips rather than solder on top of them.

 

I've seen this kit on ebay US... but sadly it's not available for shipping to the UK. Anyone know what the hidden components are and how I go about fitting them all?

 

[Software to convert Cas to Wav that works on windows 10?]

Hi all,

 

I've finally got my 400 and 410 up and running nicely, but now I need some software! I have some .cas files and have found a very old utility called cas2wav but it doesn't work on any modern 64bit operating system. Anyone know of a more up to date bit of software I could use?

 

I already have all the recording equipment ready as I used to transfer commodore .tap files to real tapes for a VIC-20

[re-wiring US 410 to take UK style external power adaptor.]

I think you've misunderstood my question. I have no interest in "going back to the original power supply". I simply want to know if you can convert a US 410 (which has no transformer, just a fixed cable with 110v plug) to a UK 410 (which has a round socket to attach a 6v DV transformer).

 

If I understand your original posts, are you saying that I can simply chop the US plug off the mains cable then attach a 6v adaptor directly to that same peice of cable?... surely it needs 110 volts? Not 6? I was imagining the solution to involve openening the case and soldering a new power supply somewhere to bypass all the circuitry that usually converts the 110v to 6V, but if as you say I can simply connect the mains wire to 6v and it will still work that's great... if that's the case.

[re-wiring US 410 to take UK style external power adaptor.]

Ive got plenty of 6v power supplies, my question is how do I convert a 110v mains wired US 410 to take a 6v power adaptor in the first place. Are you saying I can just put 6V into the existing 110v line and it will still work?

[re-wiring US 410 to take UK style external power adaptor.]

Hi all,

 

As many of you probably know the UK 410s weren't hard wired with a power cable like the US ones, they came with a socket for a 6v power adaptor. I'm in the UK and have a US 410 which obviously isn't compatible with out 220v outlets.

 

I could buy a step-down converter to provide it with 110v but they cost nearly as much as the drive! Can anyone tell me if it's possible to rewire it to take a 6v adaptor? Presumably this would mean bypassing a 110v-6v adaptor of some sort built in to the drive.