NISMOPC

I've noticed that on a few ebay auctions. Curious if they just used what they had at that time between the red and silver boxes.

The following cartridges are for sale. Shipping to USA only... ...decided to keep them

Done.

I removed the SIO from a 130XE parts board first by drilling out the pop rivets with a drill bit same size as the rivets. Once through, they just popped clean. Then removed solder from each pin and slowly/gently pulled up on it. if any resistance, I would see which pins were sticking and pull solder off again. Repeat until it came free. Was tedious, but easier than I expected.

I know your'e looking for CIB cassettes, but I have a few cartridges for the TI with no boxes/no manuals if interested... ...mostly common games. Let me know. EDIT: I see your in the UK - nevermind! good luck with your search...

I stand corrected. Here is one of the 130XE's I purchased with a bad keyboard membrane. Random chip upper left corner...

The NTSC 130XE's & 65XE's I've had in my possession were all mT branded. That's been about 10 all together. If you have one or two random chip's in there, it's more then likely it was replaced at the factory during final assembly testing and a faulty chip was identified OR previous owner replaced a faulty chip.

Got my board the other day. GREAT ITEM!

PM sent for: COMPUTE!'S FIRST BOOK OF ATARI COMPUTE!'S FIRST BOOK OF ATARI GAMES MAPPING THE ATARI CREATING ARCADE GAMES ON THE TI-99/4A PROGRAMMER's REFERENCE GUIDE TO TO TI-99/4A and 7800 games.

Must know something we don't know...

No takers on first attempt, so relisted at lower price. BUMP!

If this for some reason isn't gone, I'd like to be 3rd in line (more than likely it is as you mentioned, but given it a shot)

This is the 64k mod I did on the 600XL Luigi301 has. Three wire set-up..

Double post. Disregard...

Dumb question, but how did you verify the purple wire on SIO is pin 7? Not all SIO plugs are the same wire colors. I salvaged my SIO plug/cable from a non-working 410 Program Recorder and the colors are White, Black, Brown, Orange. ATARI 401 SIO to FT232RL USB Pin4 (Black) to GND (Black) Pin5 (Brown) to RXD (White) Pin3 (White) to TXD (Green) Pin7 (Orange) to CTS (Blue) With these connections, I am using CTS Handshaking with RespeQt and AspeQt with no issues. 19800 baud...

SOLD...

If anyone is interested, I decided to sell one of my 1010's. It has never been opened... https://www.ebay.com/itm/ATARI-1010-Program-Recorder-Cassette-Player-NEW-SEALED-in-Original-Box-/332418550134

Guilty too...

For those of you who asked... The 800XL motherboard is fully socketed. The post on upper case that was repaired with hot glue gun.

Lowered price... ...make an offer.

Lowered price... Make offer...

800XL - No power supply or RF cable. No box or manuals. $75 + shipping. $60 + shipping. Works as expected... Slight yellowing on top case. One of the internal keyboard screw mounts has been repaired with heat glue gun on right side. Post was damaged. Does not impact use of keyboard or the external case. PM me with offers. Thanks!

Bump... Updated post...

Holy sh!t massive ad invasive post. Sorry, but the ads completely destroy any interest from me...