Lynx Multi Card Preorders

[Lynx Multi Card Preorders]

I think there is already something like that already developed...maybe. It's getting harder for me to keep up on these things as I continue to get older.

I can relate.

[Lynx Multi Card Preorders]

Hi IlChengis,

 

I will definitely take that into consideration down the road once I get started on these other extra mods.

 

Sounds good, thank you.

 

On another note, I received mine as well! I have yet to try it, been so busy. Did you change the loader to a different one, or kept the pre-loaded one?

[Lynx Multi Card Preorders]

Sure thing.

 

[...]

 

tanooki2017: Thank you very much for sharing your mod plan. Very interesting. I have no problem soldering, but I think I'll limit my mods to SainT's card and the LCD upgrade for the time being.

Are you planning on documenting your work on the Lynx once all the parts arrive? Something like pics, or maybe a YouTube video? Not trying to add to your workload, but if you manage to document it in any way and share the final result, I am sure it would be very well received. Heck, you could consider putting together a kit, perhaps.

 

In any case... thanks for all the info.

[Lynx Multi Card Preorders]

I have also just ordered the McWill LCD kit, 40mm speaker, 3W mono Class D amplifier to power the speaker and give it more volume as well as some oomf in the lower end to drive the new 40mm speaker, and DC-DC converter fix kit just in case I blow something or it quits turning on.

tanooki2017, I am aware of the McWill LCD kit, but can you share any more info on the other mods you listed? Thank you

[Lynx Multi Card Preorders]

 

I was referring to the software which runs in the PIC on the card which handles the "real" FATFS and copying from SD card to SRAM (as far as I understand). Not the software which runs on the Lynx. Just look into the source (1st post). The PIC receives commands from the Lynx.

If the PIC software would be open/could be replaced, there would be room for more (like off-loading calculations) features besides the filesystem.

Ok, thanks for clarifying.

[Lynx Multi Card Preorders]

 

No, that's staying closed. Keeping that closed is the only IP protection I have, as the board is otherwise off the shelf parts.

 

I see the Lynx software in the start post. What about the PIC (correct?) SW?

Can it be updated?

Do you plan to open this as well?

 

Hi guys. The above exchange confused me a bit. Are you saying that the source code is available for an earlier version of the menu/browsing software, but the latest version is closed source due to IP (since hw is off the shelf)?

 

I assume the cards are shipping with the latest version (non downloadable), correct? Is anyone running a 3rd party version of the browsing software? If yes, is it possible to revert back to the original?

 

Probably stupid questions, but my card is in the mail and I haven't had the chance to play with it yet, so all I can do is speculate. Thanks for clarifying!

[Lynx Multi Card Preorders]

 

http://www.retrohq.co.uk/neogeo-pocket-pre-order

 

As ever, there's a bit of a wait...

 

I've been trying to sort out my 3D printing setup, but the cold weather over here is causing me pain. I've built a heated enclosure for the printers, just need to get it all setup properly then I can print a shit-load of shells out. Time seems to be such a scarce commodity....

 

Sounds good, thank you.

[Lynx Multi Card Preorders]

I have NeoGeo Pocket SD and Lynx SD active and Jag SD in the works. So there's a lot going on!

 

Hi SainT.

 

Did you say NeoGeo Pocket SD? How do I get on that list?

 

Thanks.

[Lynx Multi Card Preorders]

Hi SainT.

I'd like to be added to the waiting list for the multi-card with case. Thanks!