256 colors

Yep let's hope that's less of an unnecessary mindfuck to use

If i remember correctly type sara then x that should bring up cheat options

All games are in ST format in each of there own folders no MSA files Both HXCSDFE.CFG, and AUTOBOOT.HFE are in the main USB root Selecting images to boot with F7 works a lot easier then fucking around with dials and buttons thank fuck! Turning the dial to give me AUTOBOOT 000/000 HFE message then resetting the computer into HxC Floppy Emulator File Selector Okay now finally getting somewhere With dm in slot 1 and the blank in slot 2 now able to boot dm with F7 as above Once inside dm selecting blank disc from dial was able to format disc and save game and reload dm game save position

After placing files HXCSDFE.CFG, and AUTOBOOT.HFE in the root of usb stick turning the dial or using both buttons does nothing on the GoTek drive apart from giving me AUTOBOOT 000/000 HFE message Clicking the dial in or out gives me Host Direct Access/Host Direct A*EJECTED If i just turn on the computer or reset it always boots into HxC Floppy Emulator File Selector I also flashed FlashFloppy v0.14 Gotek drive too version v1.0 Skipped Updating the Bootloader it says i don't really need too

I can select slot 001 for dm okay then select slot 002 for blank in HxC Floppy Emulator File Selector that's fine Turning the dial or using both buttons does nothing on the GoTek drive apart from giving me AUTOBOOT 000/000 HFE message Clicking the dial in or out gives me Host Direct Access/Host Direct A*EJECTED So at the moment no way of selecting any slots or resetting because of the above

That's not the only issue then iv'e got problems with the XRGB-Mini refusing to sync no matter what i do unless it's static screen or a very very basic game At the moment lucky i can put Atari STE direct into the tv/monitor via SCART for the moment

I did this using the files from the zip On the Gotek drive display i get AUTOBOOT 000/000 HFE as i press reset i get screenshot 1 but with two bombs Also tried the other HXCSDFE from V3_CFG_FILE folder Edit:ignore the above didn't realize there was another CFG file that needed removing first At least i can get too screenshot 1-4 so far will tinker bit more with it tomorrow

So i need HxC Floppy Emulator File Selector on the usb?

Right you've lost me a little bit about about drive 2 can you explain a little further How would i setup a drive 2 if needed?

With this new drive if i want to save game progress or position how is this done? For example i just download Dungeon Master 1.2 in as a ST image from Dungeon Master Encyclopaedia

It's under six months warranty so i will leave that for the moment that way i don't have put up with bullshit from eBay sellers telling me i broke it

Something like that if you start from 0 for example then dial or button up to [] then wait and starts from a and so on Not worked out yet how to jump to any letter without dialing up or down?

The 1040STE eBay purchase came with FlashFloppy v0.14 Gotek drive and 15GB VERBATIM USB stick The USB stick has 68 files mostly all games in ST/MSA and maybe more file formats i didn't check them all On the drive two buttons a green light and rotary dial My problem is i have no idea how to use it being total newbie this stuff I did do google search could only find advance topics like installation and firmware stuff i'm all at sea here trying to understand the basics of loading and browsing files The only other file in the USB was a IMAGE_A CFG file thats reads like: AnotherW_FL/Another World1.st Any help please?

@6BQ5 were did you get your scart adapter to XRGB lead from? With the lead here the XRGB MINI refuses to take any signal from my STE

Just ordered one today https://shop.dansprojects.com/time-sleuth-lag-tester.html

Would you mind please sharing your Framemeister STE profile i know it's for NTSC but least i have a base to modify for PAL

Just curious here i know a PAL MSX2 does a v:50 15hz output and a PAL Acorn Electron does v:49 00hz all on RGB Also are PAL machines interlaced or progressive sources? So what output can i expect from a PAL STE from RGB?

I wind my friend up by telling him i have a real Atari home computer and he has a crappy Commodore games machine Oh and play games too and some point i want to learn some basic

Shoud get it friday Atari 1040STE with GoTeck drive and 4MB of ram TOS 1.62 english Theirs a pink security marking on the case any ideas on best way of getting rid of this?

I have my Philips NMS 8250 MSX2 rigged up to the Framemeister via RGB SCART On using the default Framemeister profile or any other profile in the full status screen my response times are constantly variable on a static screen no matter what i do Example delay times anything from 0.0.6 to 13.10 and this happens all the time Tried other settings and seems to make no difference any ideas please i'm very stuck

Came with some MSX stuff does work on the Atari but it's worst iv'e ever used so far

$91 for tape games that's if they even work glad i didn't bid on this

That's what i love about the Atari section of these forums nice friendly people

For anybody who has a XRGB-mini upscaler Miacomsoft have moved site and theirs new firmware but it's well hidden you can find it in this thread https://shmups.system11.org/viewtopic.php?f=6&t=33450&sid=654b4dafd5d1be658437d0df8eaa07fc&start=11130

Same with my SAMSUNG T32E310 32" LED TV/MONITOR turn game mode on and lagg goes down but on some systems that adds jail bars with the image quality going down even on S-VIDEO or RGB Add the XRGB-mini upscaler sometimes with good and bad results