lopezpb

I have checked three diferent GTIA chips, on each is the same.

Could it be that no one else has such problems ?

I put my board together a few years ago, but recently I started using it more and noticed a problem with the colors on standard GTIA whether by UAV or stock video. Basic color is green (not blue) and it can't be adjust by the potentiometer. The weirdest thing is the "road" in the Numen demo is pink not brawn. I spend few hours by swapping potentiometers, changing GTIA, ANTIC to other ones, but without any changes. I ask my colleague Santyago from the Polish forum atari.org.pl, who also assembled the same board, to checked on his XE Remake board. And he has pink road in Numen and green Basic colour on standard GTIA to. Because he had Spohia2 mounted on his board from the beginning, so he did not check previously how the board works with the standard GTIA. In fact, when I mounted Spohia2 in place of GTIA the colors are correct. Do you also have such a problem with colors on XE remake board? or maybe there is a fix that corrects this?

I used TLV70233DBVR instead, it works fine and I don't had to wait for shipping from China. @repetto74 STM32F407VET6 works fine

I have PCB from PCBWay: https://www.pcbway.com/project/shareproject/UnoCart_2600FS_v1_03.html I have one more question, is there any replacement for MIC5504-3.3YM5-TR?

I want to build a Uno 2600, but with the current lack of STM32F407VGT6/7, can I use STM32F407VET6 instead?

Do you know why the repository was deleted? Has anyone made a copy?

I got an e-mail that it is available in the DragonBox store, but unfortunately after clicking it, it turned out that it was already sold out I still need to wait can I somehow find out which I am on the queue list?

Yes, this workaround works, but it would be great to add this functionality in the future update.

I found a small problem with the AVG cart with SIO-mod, if you search some files by "/", it is not possible to assign ATR to drive (shift +1,2,3,4). When I select them manually without a search engine, everything works fine. I'm using firmware version 20.

Sounds like a plan ?

Of course I was doing it wrong, thank you very much. Cartridge came back to life :-D

I received the programmer and set it according to the instructions. I give START and programming finishes but after connecting to computer cartridge still won't get up

Thanks, I will buy this programmer, it will be cheaper than paying for shipping. Should I flash version 14 that you have posted for unblocking or can I immediately upload version 20?

I need help to bring the AVG cart back to life, there was a power outage during the update to ver. 20 and unfortunately the cart does not get up It's possible to flash AVG with Rpi or I need to buy ESP8266?