candle

this is with sega genesis rgb output as i suggested before, just for vbxe rgb

i must ask are there any provisions for stereo audio output? i'ts pretty common novadays i think...

if you could do SRAM with 300/600 mil option it would be much easier to source these chips

no, it should not as for bf2k+ question, time will tell - it should not in most cases, but if some cartridges banks in and out their cartridge space rapidly, some delay might be introduced that will push things out of sync - but it would be hardware specific, and really rare if observable at all

you just need a random one cartridge that does that (pac-man? why not!) and you're done, so i strongly suggest to add them

simplest way would be adding 2.54mm headers in front of eci/cartridge ports you could add some footprints for din13 (vbxe) and dvi connectors in place of modulator in one way or another nice touch would be to add some points for console keys - or labels for easy identification, same goes for joystick ports or you could go with din8 connector with optional rewiring it to sega-genesis standard

then i would say it would be not the root-cause of issues observed, and focus on another diffrence which already stroke me while working on side3 - data bus termination on XL machines

from my point of view, it's not - it would be if i saw on that video program being executed (as traceback with register states and listing being executed), and I don't know anyone with such possibilities perhaps Simus - i don't know I have 48 channels LA, but it won't do listings - that i could get with external tool if i dump what LA registers, then again, i do have my own work and Atari projects i would like to get going, not to solve anyone's else issues

sure it is, but we're left alone - do not expect anything from Pasiu this is as good as it gets

all i can see here, is drac030 trying to get simple information: how to trigger the issue; and getting all but the information needed his only guilt is getting engaged into a pointless discussion, with people having no rapidus board installed to be able to contribute with information required i'm sure someone draw a rapidus logo, thus that person is also part of design team, go blame that person - it's silly? i don't really see any diffrence there rapidus is a single-person effort (hardware-wise) and a result of 12 years of development (if not more) starting from simple things, and going through diffrent stages of development yet, final design was never tested on anything but few XE machines, not to mention XL or 1200 xe's reset circuit generates single, narrow reset pulse, whereas xl's one puts this singal low as long as reset key is pressed, then there is a RC circuit generating some "constant" time for reset, especially power on reset this "constant" time varies, as years passes since capacitor used in that circuit is electrolitic one, and parish with time first thing to attack would be that capacitor, then whole reset circuit, and no, drac030 won't do it, unless there is some programming language that can accomplish this task

FFC? where?

the "unknow" piece is covox

the answer is in post #569

yes it does

I'm just fulfilling my obligations if this will be available for purhase, you need to ask Lotharek about this

ehem, just for all to know hell frozen and we, the doomed ones, playing with snowballs all days all 6 prototype boards were finally assembled, and should be shipped out soon* (* in period shorten than a year... kidding)

16mhz AVR with all its migt just won't cut in uno carts showns that ARM can do it though

this is certainly not a pbi device, it just lives on d1xx page it will be allright with u1mb install, but you should really do it by the book

do it by the book and you'll be fine - just implement this as fully blown pbi device

in git repository most probably

heh... ; SNES23DO.asm ; ; Created: 2/6/2021 6:07:45 PM ; Author : Robert Smith ; nice touch

all devices that were available with all documentation for repair (schematics, cpld/mcu programming files) have been cloned and are "offered" as new products how should i feel about that?

i hope so under u1mb bios: pbi enabled, hard disk enabled memory configuration of your likeings, and jump to loader in side3 loader (this one starts from what you wrote) try to boot an atr make sure you have disabled/unmounted any cartridges, and basic is also disabled - there are separate tabs that will tell you this

for atr support on side3 you need to have complementary pbi bios installed on ultimate1mb by default it comes with pbi bios for side2 devices

i just wonder where this thread is going to...