shiz
-
Content Count
31 -
Joined
-
Last visited
Posts posted by shiz
-
-
On 5/5/2021 at 8:12 PM, -^CrossBow^- said:Yes the DF requires its own power supply. 9v 1.5A with polarity center positive in your case since the 7800 would be powered separately.
So in your case, you will need two different PSUs. The one you have now for your 7800 still connected to the 7800 and your other one plugged into the DF cart to power it.
Doesn't do anything though, the console powers up but the cartridge still show nothing
-
So the power supply HAS to be going to the cartridge? I might have a problem, I got this French 7800 and it has a totally different input, tried with another 9 volt 2A power supply which did fit on the cartridge but the cartridge itself wont turn on no matter which swich I turn on/flip
-
I was wondering, is it possible to make other games use the Pokey chip for music and sound instead of the standard chip (forgot which it is) or does that require a romhack?
-
8 hours ago, -^CrossBow^- said:Yeah pretty much the only model of the OG Xbox you don't have to immediately worry about the caps on is the later 1.6 versions like I own. However, having said that I replaced all of mine out anyway including the clock cap that you aren't supposed to replace.
But yeah, if the caps near the power connector and the CPU look like that, you better look around the caps in the lower left of the mainboard under the DVD drive. Because that is where the clock cap lives and it likely looks the same or worse.
5 hours ago, Asaki said:It's not even a cap issue, the traces just dissolve all by themselves. I had to fix mine a few years back, all the caps are perfectly fine.
They think it's just some weird manufacturing defect.
I don't think that's the issue, as you can see everything else seems fine
-
Is there anyone in Europe with a Xbox repair service or a cap replacement service?
-
So are those caps necesary to make it startup? Their awefully close to the ATX MoBo pin. Do you think they are badly damaged? I never had any cap problems with any system so I wouldn't know.
-
Okay so I removed some components to look what model this is on the mobo when I saw these 5 caps, might I been mistaken about the PSU, and that this is the actual culprit asto why my Xbox won't work anymore?
-
1
-
-
Hi looking for someone who can repair my Xbox, won't start anymore, checked inside and it looked like theres something wrong with the PSU
-
Hi, looking for someone who can do a decent enough job of modding a PAL Snes and PAL Master System to 60hz
-
Please put me on the list, just the Dragonfly.
-
I Know it's a well over 8 years now but, does the RGB work well for both pacs and is there anyone who might want to mod it for me?
-
I'd like to buy one
-
16 hours ago, mr_me said:Does the screen flash when you press reset?
Depends on what you mean by flash, when I press reset, the screen disappears for a sec or 2 and I the same thing as in the pic.
-
57 minutes ago, mr_me said:What did you try exactly?
I turned the console on
-
On 7/17/2019 at 2:04 AM, mr_me said:You'll need the "enter" button or a side button to start a rom file from ltoflash. Put one rom file and no folders to make it simple, PGA Golf would be good for testing. Do you have any regular cartridges?
If nothing works, you can try unplugging one of the controllers for testing.
Regarding the faint signal, your TV could be tuned slightly off, or the master clock crystal in the intellivision could be out of tune, and probably other possible explanations.
I tried but now I can't see anything. On my CRT it's just all kinds of snow but none of which you can tell what's happening. How common/uncommon are those French RGB Intellivisions? I'm thinking of taking one of those instead of having to deal with this shit.
-
On 7/15/2019 at 6:00 PM, mr_me said:What model intellivision? Are you getting passed the titlescreen? Is there any correct response from any controller input? What cartridges do you have to test with?
First model, PAL. I'm using the LFO flashcart. It does react to some buttons but it's hard to select anything.
-
I bought a Intellivision a while ago but the controllers don't seem to work exactly. Side buttons and membrane have been cleaned but I'm not really sure if they are broken or not pressed well enough, the d-pad doesn't seem to respond at all. Any way to fix this? Also is there a way to make the RF signal better? It's a bit too faint.
-
Is it me or is the Atarimax guy dead? Send him some mails but he doesn't respond.
-
If you send Joe a p.m. through here he would be able to give you all the details.
So it's the user simply named Joe? If it is him, I've send him a message but he isn't responding yet.
-
I did a electronic transfer to Joe's bank. It took a bit longer than Paypal but worked just fine.
What is his bank account number? I tried looking for it on his site but couldn't find any, do you perhaps also have his email address?
-
Is it me or are the Magnavox controller buttons prone to dissapear/be broken?
-
I have a PAL 7800 and tried to install the PAL50 bios and EEloader so that everything would be displayed right, but I can't really know if it actually installed it or not since the only thing you check is witch BIOS version you have. Colors do seem to be displayed correctly now however. Also while I am sure I installed the 106 version it says 105.
-
I bought one but was wondering do these fit in any 2600 cartridge shell?
-
Is there any place you can still buy Videopac/Odyssey 2 flashcarts?
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
"Dragonfly" preorder
in Atari 7800
Posted