pseudografx

Well, I'm not a fan of the font you used but that's just me. I may use just the top part of the sticker on my device.

How about Mario Bros?

Hi phaeron, did you read my private message?

Here is my version of the Duck Tales - The Moon: https://soundcloud.com/pseudografx/duck-tales-the-moon

If I could ask for the next remake, could you try to do Duck Tales - Moon stage? :-) I already started working on it but might be nice to hear a different approach.

Simius has already cleared this up: "The 16 shades is now switchable by bit3 PMCTL ($D01D) (default 0=off)"

The issue is that lasercutting won't cut it (pun intended ) for a full-featured backplate as also some intricate bending of the edges has to be done. See the image of the blank backplate in post #513.

Sorry if this has already been answered, but is there a way for software to detect is Sofia is installed?

Spellbinder will be released with the new issue of the Flop magazine. It should have been out at Atariada 2017 already, but because of certain technical issues, Flop release has been postponed. You can expect it in the near future though.

If anyone has the skills/tools/friends to drill a metal plate, it could be glued or screwed on to the plastic backplate for more sturdiness and better look. It would surely be much easier to customize a flat metal plate than make an intricately shaped one that would hold there on its own.

This would also allow for embossed labelling

I guess most users would not mind if the backplates were made of plastic, 3D-printed.

After a long time, finally a song that is not terribly out of tune :-) And really not a bad one. I'd try some shallow and slow vibrato for the lead voice if the frequency resolution allows. Or maybe some portamentos here and there.

Here is a YT video of the production @720/50p:

One assembled for me, please.

The problem is that the value in COLPF1 (D017/709) is 202, which is just that colour. So blame the Atari engineers that they did not set that to 154, which would correspond to what you actually see on the screen.

IIRC, Atari800WinPL does not change palette when switching from PAL to NTSC, instead you have to choose the palette manually. So you may be running that emulator in NTSC mode with PAL palette. You can change palette in Altirra manually to PAL colours if you prefer that setting.

Hi, first I wanted to thank you for the time you spend on Altirra development, which gets so much better with every release. Second, I'd like to ask if there is any chance that Altirra could support adaptive synchronization technology such as Freesync or G-Sync. Running the emulator in PAL mode on a 60Hz display is such a pain...

According to this article:http://www.brighthub.com/computing/hardware/articles/15142.aspx Ira Velinsky has died on November 14, 2000, on a plane, returning from COMDEX trade show. He was only 46. So in two days it will be 16 years.

It does for me.

You can use WinAMP diskwriter feature together with the ASAP plug-in.

Unlimited bobs with finite length are actually doable - see MaPa's intro:

The C128 had a Z80 built-in. Not sure about the frequency though.

Feel free to use whatever you like from my work. I'll send the bill later Hope to see you at Fujiama again!

In fact, to me it looks like a filthy hack to use the engine for a platformer But definitely a good job!