I added a USB port to my Roller Controller so that I can power it from the PS/2 port on the Phoenix via a standard Printer Cable.... Slither works flawlessly...
Let me know if you have any questions...
Seeya
Joe
I had a spare Atari Expansion module so I built a standalone Atari module... don't know why but it was fun!
I originally posted this in the ATARI 2600 forum... its probably more useful here...
Hopefully some of the info helps somebody else...
Seeya
Joe
Standalone EXM1.pdf
I don't know why I did it... I had a second expansion module #1 that I decided to make standalone with the info from this topic...
Here's some pix...
Standalone EXM1.pdf
Seeya
Joe
I tried a PS/2 numeric keypad.... The only keys that are active are 2=down, 4=left, 6=right, 8=up so you cannot use it to select numbers or enter to fire... The Num Lock button does nothing to change the functionality.
Seeya
Joe
The Race is ON... CollectorVision is looking for an AutoCAD Engineer to design their new Phoenix console controller....
Collectorvision AutoCAD posting
Now that CollectorVision has released their Phoenix console, there is definitely a market for a new controller....the original CV controller is a dog.
I have 6 original CV controllers... only one works 100% and I don't feel like repairing the others right now. ?
Since the Phoenix has an SNES controller port, I ordered one of the Super Famicom NTT controllers in the meantime... (lots of extra buttons but no overlays)
Seeya
Joe
Hi Matthew,
I would prefer the second link for the "Short Flat Slim Thin HDMI FFC FPV HDMI Cable Standard HDMI Female Plug to Standard HDMI Male 90 Degree Compatible with RED blackmagic BMCC Sony FS7 Canon C300 Black 10cm" I already bought one a few weeks ago
seeya
Joe
Hi Matthew,
Thanks for the guidance... I saw the micro HDMI on your prototype and got excited..
This is my new plan still using the panel mount extension cable in conjunction with an FFC cable with a female micro HDMI connector... (I photo-shopped an FFC on your PCB)
Please let me know if I am still in error in my assumptions
Seeya
Joe
I ordered one of these "Micro HDMI Male to HDMI Female Extension Cables" to install in my ColecoVision with the new MK2 board
https://www.amazon.com/ShineBear-Plated-Speed-Female-Extension/dp/B07NPGXQY9/ref=sr_1_4?keywords=Micro+HDMI+Male+to+HDMI+Female+Extension+Cable+Screw+Panel+Mount&qid=1560987149&s=gateway&sr=8-4
I hope this helps
Seeya
Joe