Retro_Game_Lover96

I doubt it.

Here is my board. I socketed some of the chips (such as the VDP chip right before I added the RGB mod board.)

Sadly, I do not have an ADAM printer. By the way, what if it doesn't work after I remove the RGB mod?

@NIAD The Adam was working fine with the mod right before it has the black screen issue.

Basically, this is the ADAM I bought with the pre-installed power supply mod.

This power mod I didn’t work on.

I tried, but it doesn’t show up at all.

Hi, I have an ADAM that is standalone, but I have a stupid black screen, so any ideas how can I get this thing working again?

I tried to clean and reseat the chips from the ADAM board, but I still got the black screen.

I guess the ADAM board chips need to be reseated to fix the black screen.

It was working fine until I get this stupid black screen with humming audio.

I doubt there’s something wrong with the RGB cables. I also don’t think there’s nothing wrong with those regular video cables either.

Listen, I decided to give a VDP chip a socket, and then I install an RGB mod.

The ADAM was working fine in the other day, so I have socketed the VDP chip just in case for an easier replacement before giving an RGM mod.

Guys, I got a black screen with the humming audio issue on my ADAM, so how do I get it to work?

I think the 24 pin to 28 pin adapter could make the no delay bios chip work on the standalone ADAM.

Coleco Adam from XRGB mini via Composite vs Coleco Adam with TMS RGB on the PVM monitor!

I found a solution for the audio, I tried to use the gscartsw switcher, and I got the audio working.

I got some bad news, I got no audio while the ADAM has the buzzing audio while the RGB mod works on the ADAM.

It is possible to do an RGB mod on the ADAM via the TMS RGB.

I doubt the no delay bios could work on the Adam stand alone version because it doesn’t have the extra few holes for the chip, so it won’t be possible.

Also, is it possible to do the No Delay Bios mod for the Adam, or it could only work on the standard ColecoVision?

Despite Adam has a TMS9928A chip, it has a composite output without any modifications. I think.

I bet it could work, so it should have the same VDP as the regular Cole Vision. Coleco ADAM + TMS-RGB + Virtual Disk Drive + Internal Power Supply Mod = Ultimate Coleco ADAM!!!

Hi, I have an honest question about the standalone ADAM computer. Is it possible to do the TMS-RGB mod on the Coleco ADAM? I am not sure the VDP is the same as the regular ColecoVision’s VDP or not.