Mehridian Sanders

Got it from Mouser.

Well ... I may have a PEB coming soon. I may actually be able to contribute to this!! Sent from my SM-G955U using Tapatalk

True but the error message also says that it is detecting 0x00000 and retrying. To me it is not detecting at all. Gonna try again tomorrow with a dedicated 5v external supply Sent from my SM-G955U using Tapatalk

Well cannot get the reader to see the Atmel chip. Do Atmel chips require anything to prepare them for loading the .hex file onto them? Mine is not showing up at all. Which leads me to believe that the chip is fried or the circuit is broken on paths to the Atmel. Ask anything even questions considered dumb. Never programmed an IC before, unless you count Dediprog. Sent from my SM-G955U using Tapatalk

Throwin some "shade".... Sent from my SM-G955U using Tapatalk

Chalk this up to "noob-know-nada". I haven't pranced frolicking through the house in a long while. Thanks all [email protected]!! Sent from my SM-G955U using Tapatalk

I'm assuming the barrel plug needs to be there. That would probably be the problem. Sent from my SM-G955U using Tapatalk

> Size 13928 bytes of stack free 24488 bytes of program space free this is with the speech synth installed. - power off TI - remove SS from TI / seperate 32k from speech synth - install 32k direct to TI - Boot - same result.

You are missing nothing. It's overpriced. Sent from my SM-G955U using Tapatalk

Well the XB cart and the SPI AVR programmer came today... but I need to buff up ye olde Resume, family of 5 is expensive in California. Added bonus... got Microsurgeon cart!! Sent from my SM-G955U using Tapatalk

Well it has the drivers on 5 .25" ... but I don't have a reliable floppy drive at the moment. Also.. optical mouse? With an Aluminium mouse pad? Beginning to think this is an industrial terminal mouse. Sent from my SM-G955U using Tapatalk

Well ... looks like I need to assemble a proper system first. More on the morrow ... I'm getting the stink eye Sent from my SM-G955U using Tapatalk

K will do Sent from my SM-G955U using Tapatalk

Well onto ebay it goes then. Need to fund my PEB account. $50 too high? Sent from my SM-G955U using Tapatalk

Oh snap, the guide says 1987. Sent from my SM-G955U using Tapatalk

Well then I guess I open it. Sent from my SM-G955U using Tapatalk

So I acquired this today. Am not sure if I should open it or not. Is there a large calling for Unisys Mice? I can't find anything on this model. Sent from my SM-G955U using Tapatalk

It is very versatile. I have had immense fun tinkering with mine. Sent from my SM-G955U using Tapatalk

Yeah I stopped bidding a while ago. Sent from my SM-G955U using Tapatalk

Picked up a SPI programmer... we'll see soon enough Sent from my SM-G955U using Tapatalk

I truly hope so

Unfortunately, it looks like it is fried. I cant get it to recognize. Sent from my SM-G955U using Tapatalk

Well I gave it a go. Board is not recognizing. Then I realized that the power adapter was only giving 2 amps ... and the RPI needs 2.5... that .5 amps might be what was causing the chip to not be read as there was not enough power to power the chip. ,..... *facepalm* more later.

hmm I might try and work on this. I always have to try the most difficult thing. out of some strange sense of self loathing maybe... not sure.

I was about to flash the device, and I ran into a conflict I have already emailed for a resolution on. The Silk screen on the FG99 says "3.3v" AVRdude says use "5v". I really don't wanna create magic smoke from this project. Would using the 5v as AVRdude suggests harm any of the components? We shall see or if you know please respond so I can have a wonderful weekend with this lol.