lplp
-
Posts
22 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Events
Store
Everything posted by lplp
-
Hello,
Was looking at the Ultimate PC Interface V3 on your site. Mainly want to use it for Intellivision and Atari 2600 and Atari 800 emulators on Raz Pi 3b+ Retropie Emulation Station setup with original controllers. I had a few questions:
-Will it work well on that setup?
-Will the controllers always be easily recognized by that system as I unplug and swap them or will I have to reconfigure every time?
-What effect will your adapter have on my current 8 bit do sn30 pro + controller which is the only one I use right now? Will that still be easily recognizable without reconfiguring when I swap it with your adapter?
I really appreciate your feedback on this. Thank you!
- Show previous comments 8 more
-
The hackfile you just download and install in the appropriate directory (I forget off hand where that is on RetroPie - should be in the RetroPie's help wiki) -
http://intellivision.us/intvgames/interface/hackfile.cfg
There is info on the hackfile here, scroll down to the "How to configure Intellivision's jzIntv" section -
http://intellivision.us/interface.php
Look at the order of the wire colors -
Original green connector with correct ordering of wires (top to bottom - brown, red, orange, yellow, green, blue, black, grey, clear/sliver). If your wire order backwards, then you need to reverse the connector with may require removing the dongle shield.
-
Thank you! The dongle shields needed to he removed in this case. They now seem right side up.
Just to be clear, I just need to paste that exact hackfile into a new text document and then drop it in my jzintv rom folder and keypads should work properly? And I should be able to use the double key combos mentioned to pause, exit from the emulator?
It's a bit confusing to a novice and I just want to be sure not to mess up my whole system configuration. Your input and support has been greatly appreciated.