lotharek

February 3, 2015

Please, resolder 40 pin sockets or send it to me please

February 2, 2015

gentlemen,

there is manual at my www....

http://lotharek.pl/zasoby/produkty/98/pliki/sio2pc-usb-manual.pdf

February 1, 2015

hi,

tnank You guys - That are the monent worth of hard work nights...

really appretiated - motivation kick obtained :-)

I`m here..working... INFO at my www updated - just forgot due to busy week at burg serivce (day work) and.......

4th KYU test at judo lessons :-) so very heavy week - forgive !

January 12, 2015

hmm... good question. i produced big pile of above rather before Your updates....so - probably primary version is sold

January 12, 2015

1. download : http://mmj.pl/~lotharek/side.rar ( ready image for 4gb or bigger cf card)
2. Extract to hdd ( 4gb after extraction)
3. Download : USB IMAGE TOOL http://www.alexpage.de/usb-image-tool/
4. Restore image to sd card
5. RUN AGAIN SIDE

VERY IMPORTANT !
Run as ADMINISTRATOR and CHOOSE DEVICE MODE ---- NOT VOLUME MODE ☺
Do some writings to card /copy between partitions or sth/

January 12, 2015

Happy to help :-) and Your success !

ENJOY !

January 12, 2015

+2 please !!!

January 10, 2015

Jinks,

"useless unless you have a way of knowing where pin one on the chip is"

thnaks, geee.....i wouldn`t even suspect someone takes soldering iron has no such a knowledge..time to update manual...

UPGRADED: http://electronicsclub.info/ics.htm#pins

January 10, 2015

hi all,

Jinks - sorry to hear that You have problems

600xl is the same as 800xl, xegs and others. this is still 8bit atari. installation is the easiest possible. CPU is always the same ! ROM and MMU also

http://lotharek.pl/product.php?pid=67

(*1) : if You are not familiar with soldering or You do not have proper tools, Please LET the prof technician do it for You or send me ATARI BOARD for installation. Drop me mail - cost of installation is 10E only and takes me really 5 minutes. Contact me using contact form to arrange installation. Please, keep in mind I may refuse to install ULTIMATE if Your ATARI is not working properly or some mods are noticed.

INSTALLATION STEP BY STEP :

desolder MMU (20 pins) and OS ROM (28 pins) or remove them from their sockets if socketed
solder into atari board sockets if there is any (not included)
insert adapters into sockets ( RED STRIPE on cable indicates PIN 1 of removed chip)
Make proper connection of ULTIMATE with CPU - CLICK
Make proper connections with ribbon cables
Fix ULTIMATE PCB inside atari

READY ! You can power on atari, enter setup ( HELP + RESET) and adjust all You want !

NOTE: 600XL must be upgraded to 64kb prior to Ultimate installation

there is nothing to add about installation ! sorry, it is so easy anyone that can operate soldering iron, does it within 20 minutes

January 10, 2015

XEGS NTSC + ULTIMATE + SIDE2 (switch in upper position, loaded atr from ULTIMATE)

dos 2.0s MASTER - works OK

dos 2.5 MASTER - works OK

Ultimate files -- NO DOS - works OK

January 9, 2015

Hi,

thanks for info. i just have NTSC machines here - can You send me files do not work to lotharek at lotharek dot .pl ?

January 4, 2015

thank You :-)

December 31, 2014

Thanks Hias ,

followed Your advic

December 31, 2014

sorry for OFFTOP !!!

to Stephen J. Carden !!!!!

I try to respond to every mail You have sent for last few months -- POITNLESS

I`m rejected every time

DO STH ! ASAP ! PLEASE

<[email protected]>: host gateway-f2.isp.att.net[207.115.11.16] refused to
talk to me: 550-85.128.198.36 blocked by ldap:ou=rblmx,dc=att,dc=net 550
Error - Blocked for abuse. See http://att.net/blocks

Reporting-MTA: dns; lotharek1r.nazwa.pl
X-Postfix-Queue-ID: 8A08A1B81A0AA
X-Postfix-Sender: rfc822; [email protected]
Arrival-Date: Mon, 15 Sep 2014 09:51:45 +0200 (CEST)

December 22, 2014

Langsam ;-)

step by step.... first RAPIDUS as a lead design. then other clones

December 20, 2014

Thank you, Lotharek, for keeping in contact with the Atari people here. You are an excellent Atari provider! I love your work!

i wish all were happy but cannot share more time i do now...

December 20, 2014

Your contact link you posted doesn't work, fyi.

i wonder why...looks good but doesn`t work indeed.sorry

December 19, 2014

Jinks - contact form --> http://www.lotharek.pl/contact.php

choose TOPIC- STATUS OF MY ORDER

ps. i`m 100% sure You have got my mails in Your spam box of Your paypal registed mail...

ps.2 - Why THEIR ?? here is only 1 person.....

December 16, 2014

meanwhile:

December 16, 2014

When I bought the Ultimate1M, The support I got was mainly from flashjazzcat via his website (thank you Jon).

Lotharek never answered any question raised by members. Why ?

what is Your mail ?

December 16, 2014

hi

i`m very happy to offer free devices as sample/gratification for people who are able to help me a little bit with manuals.

i`m ONLY ONE and ONLY human being working regular day job and doing lotharek`s lair late aftenoon/night.

due to sitting life style ineed to change sth in my life, so on top of that all came judo lessos.. as You can see - 24hours is not enough

sorry...

October 21, 2014

Is there any way to use this with Incognito 800 using a ribbon cable to the CPU card?

that is idea of adapter for XL series and hopefully for 800/400

October 21, 2014

Pasiu (my friend) has just finished working oh NEW TURBO CARD for ATARI 8bit..it took him over 10 years of live and finally we have chance to have it home..

Due to fast internal clock reaching 160MHz fast FPGA and CPLD were used. All is much more complicated than it looks :-)

anyway, i`m just about to introduce first batch of 200 units and to be honest i need Your moral support :

PLEASE - declare - WHO IS INTERESTED ?

so far i can tell : XE comps only ( we will work for XL adapter), price approx 139E.

All movies by PASIU : https://www.youtube.com/channel/UCBISatWqmNxV2rjTsvkcF7Q