Pascal on the 99/4A

[Pascal on the 99/4A]

 

On 10/18/2020 at 10:59 AM, Vorticon said:

Hi Ron.

All the disk images are here.

Vorticon, Thanks for the link! 

 

I didn't see this posted on this thread, but here is a great page that references plenty of good info on the UCSD P-Code system on the TI 99/4a

http://pascal.hansotten.com/ucsd-p-system/texas-instruments-and-ucsd/

 

Thanks all!

 

[Attaching external drive]

I installed two additional drives to one of my TI 99/4A PEBs today after several hours of trial-n-error.  I finally found the answer here on this post.  Your suggestions and instructions helped tremendously and all three drives, including the original PHP1250, are working great!  I did end up untwisting my edge connector ribbon cable, to get mine to work, however.  Thanks all!

[GONE: TI P-Code System for the 99/4(A)]

Did you ever sell these?  If so, do you know where I can find another set?

[Pascal on the 99/4A]

WOW! Just finished reading this entire thread. I used the TI-99/4A UCSD PASCAL with P-CODE card in the late 80's when I was in college.  I think I was the only student using the TI at University of Iowa in the 80's.  The Terminal Emulator did great connecting to main frames so I could upload my code, test it on the University's systems, then print my code on greenbar sheets and turn it in to the TA. 

 

I'm buying a fairly complete system with a P-CODE card, so going to start looking for the Editor, Compiler and Linker software online.  

 

(If anyone has a complete set of the original manuals and disks, let me know.)

 

Thanks! Ron