masteries

Congratulations! It was a great deal!

USB Spinner are still manufactured under demand, The real Paddle mode is an ongoing project (to create a replacement paddle, a way to change resistance without using potentiomenters is needed)

@Tursi Your hard disk units have been sent, you have a message with tracking number and usage tutorial, Thanks and enjoy them! @JayoK Thank you very much for the feedback!

Yes, the Meanwell RD-50A fits into Atari ST/E case but it barely fits, on one of my STE, the old PSU shield had to be removed, to fit the Meanwell PSU

There are available units! At 55€

There are available units!

Thanks! You have a message with details,

Greetings, Excuse me the delay, Thanks! You have a message with details,

Quick How to flash firmware guidelines: Fujinet update is located here: https://fujinet.online/download/ USB to COM driver, for CH340 USB chip based ESP32 boards: https://sparks.gogo.co.nz/ch340.html

Update with Firmware v1.2.1! For all hardware revision units As far I tested, it works well =>Firmwares suitable for REV A hardware revision (REV A is the first version of the FujiApple), these are the same as for REV B hardware revision: Firmware v1.2.1: https://drive.google.com/file/d/1-bG7bowHWJuyEz9VAKkNcVRcBnI59wGV/view?usp=drive_link Firmware v1.2: https://drive.google.com/file/d/1S16R1CJH-lCQrGdnq5kOMbn5snws0lvb/view?usp=drive_link Firmware v1.1 : https://drive.google.com/file/d/1OtIMIUGgZYRouATKP3oUh3WJIn_8th_a/view?usp=sharing Firmware v1.0 : https://drive.google.com/file/d/16UMjHlqC_aNxAdWib7JAEvFjyfrbvfUv/view?usp=sharing =>Firmwares suitable for upgrade REV A hardware revision (the upgrade can be identified easily, your unit will have REV A marked at back, but there is also a copper wire soldered between the green board and one pin of the SD card holder): Firmware v1.2.1: https://drive.google.com/file/d/1io0UTw7FAiKTZiQ_-3t3Zo3J8RrMAD8X/view?usp=drive_link Firmware v1.2: https://drive.google.com/file/d/1ffl7-1SCgafa0xo_55lc_jyOfQGvKhcX/view?usp=drive_link Firmware v1.1 : https://drive.google.com/file/d/1V6FNA9Sv6qn5T3kdlYBX_zAwcGgFGrvh/view?usp=sharing Firmware v0.5.77bfa009 : https://drive.google.com/file/d/1elNx2yRY1EcVt_S4ILmVQG2ytTgAocNn/view?usp=sharing =>Firmwares suitable for REV B hardware revision (REV B label can be read at back side of FujiApple unit), (these firmwares have the checking for the lack of one component disabled, due to this checking is not compatible with all available versions of AHCT125 ic ) : Firmware v1.2.1: https://drive.google.com/file/d/1-bG7bowHWJuyEz9VAKkNcVRcBnI59wGV/view?usp=drive_link Firmware v1.2: https://drive.google.com/file/d/1S16R1CJH-lCQrGdnq5kOMbn5snws0lvb/view?usp=drive_link Firmware v1.1 : https://drive.google.com/file/d/1OtIMIUGgZYRouATKP3oUh3WJIn_8th_a/view?usp=sharing Firmware v1.0 : https://drive.google.com/file/d/16UMjHlqC_aNxAdWib7JAEvFjyfrbvfUv/view?usp=sharing

Thanks! Your unit has beed shipped, You have a message with tracking number and usage tutorial, Best Regards,

Greetings, These can be acquired via Tindie or via forum message, You have a message with details,

There are available units!

There are available units!

Your units have been sent, you have a message with tracking number, Thanks!

Greetings Marsupilami, From the photographs, I can see your unit is an upgraded Rev.A (to behave such a Rev. B, in order to be compatible with CP/M feature) Check these firmware list (read the post from 20 October 2023), there is a compiled version for each hardware revision, the idea is to provide support for all users, from the first hardware versions, to the latest ones: However, in v1.2 the SD card compatibility is narrowed, and there are issues with YellowStone card (reported by various users, independently of the hardware version, also with the recent one; something related to the ESP32 used libraries version).

A Falcon mini would be awesome!

Thanks for your interest! You have a message with details,

For answer 1, I have none of these printed cases. For answer 2, you have a message with the detailed usage instructions, Best Regards,

Congratulations for the porting effort! I will ask about the port needs and cutdowns, its very interesting the posibility to port from Megadrive/Genesis to Falcon,

There are units available!

There are units available!

There are remaining units, reduced at 55€

There are available units!

Here there is an example of this limitation when using a FloppyEmu: This sentence from user @nick3092 provides a clear explanation: "My guess is that the //c rom doesn't expect a smartport device as the first device. It probably expects a 5.25 drive. A smartport device would normally only be connected to the external/drive 2 port. Basically, why would it try to boot a smartport device from drive 1 when drive 1 should always be a 5.25 floppy? Pretty sure that's how my rom4 works (but it's been a while since I booted that with a smartport device). It spins the internal drive first, and if nothing is found in the drive, it then looks for a smartport device in the external port." As a brief, if you desire to use 5.25" inch disk image with a Fujinet, in an Apple IIc computer: -Connect the Fujinet externally, as usual. -Select the 5.25" disk image when the Fujinet boot ups as a SmartPort device -Swap the drive selection signal, now the external device will be 5.25" floppy only -Restart the computer -Enjoy your 5.25" disk image You need a simple way to swap the internal/extenal device, such the one proposed at big mess of wires