pdr0663

Don’t let it worry you too much. It’s an easy fix! Use a hairdryer to soften the adhesive on the controller top overlay, and gently prise it up from the sides, propping up with a skewer or similar laid down under the overlay as you go. Remove the screws. The controller comes apart easily. Remove the one screw securing the button PCB. Turn it over, remove the rubber part and you’ll see the contacts. Give it all a good clean (including PCB) with a q-tip dipped in alcohol. I turned the rubber part around so button 1 contact moved to button 4, as button 4 cops a hammering. Then just reassemble in reverse order. Will work fine! Paul