Jump to content

SnowDome_

New Members
  • Posts

    4
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

SnowDome_'s Achievements

Combat Commando

Combat Commando (1/9)

0

Reputation

  1. Thank you for that info. I was suggested to try replacing u6 after a few back and forth emails with bestelectronics. I've done a full replacement on the capacitors and have reflowed all points to rule out that problem. Aswell as replaced the parts included in the console5 voltage regulator kit. Hopefully I'm close to figuring out this problem.
  2. Thank you for the reply, i believe U6 is the issue as you and some others have mentioned now. Do you happen to know a suitable replacement for that part? From searching i've seen a few possible replacements mentioned but no answer if the parts are correct. The 2 parts i've seen mentioned here are CD4069UBM and BU4069UBF-E2. If you or anyone else knows if these are working replacements for U6, or where to find them i would greatly appreciate it. Thank you
  3. So after getting advice from a member here and reaching out to https://www.best-electronics-ca.com/ , he believes that a faulty 'U6 4069' is most likely the issue. Does anyone know a suitable replacement part that i could purchase new, or would i need to salvage that from another lynx? Thanks for any help
  4. I have a problem hopefully someone will be able to help me with. I recently obtained a lynx II sold as not working for repair, after purchasing new capacitors and the voltage regulator kit from console5 i was thankfully able to get it running again. Except for one strange issue, once batteries are inserted the system powers on instantly and cannot be powered off without removing the batteries. I don't believe the flex connector for the buttons is the issue as all other buttons work perfectly, as well as testing it without the flex cable connected to which it still powers on instantly. My concern is if this could possibly be damaging the system, or be a greater issue altogether. Unfortunately i am very inexperienced with any troubleshooting or repairs besides what i have tried mentioned above, if anyone has any ideas or suggestions i would greatly appreciate it. Thank you
×
×
  • Create New...