Search the Community
Showing results for tags 'TL866A'.
Found 1 result
-
Here's a quick guide to upgrading your TL866 programmer from the CS version to the A version. This operation enables use of the ICSP port (which is easily soldered in). TL866a.zip 1: Install the Programmer's software in C:\MiniPro (I used the current version included in the .zip). 2: Plug in Programmer (hope you chose to install the USB driver in the above step). 3: Run Programmer Software and look at the very bottom line. It should show your version TL866CS. 4: Exit back to Desktop. 5: Run the TL866.exe program. 6: Click the browse button [...] and browse for your update.dat file in C:\MiniPro. 7: Select the "Firmware Dumper" button, and hit the "Reflash" button 8: Click "Advanced", then select "A Bootloader", then hit "Write" 9: Unselect "Code protection bit", then hit "Write" A: Hit OK to exit that menu, then select "TL866A firmware" and hit "Reflash" B: When reflash is done, hit "Reset", wait, and hit "Reset" again. C: Exit the TL866.exe program. D: Run Programmer software again, look at bottom line. It should say TL866A. E: Have fun Please note that I performed the above steps while I was typing this, so I am quite certain everything is correct. Edit: There are some confirmation prompts that I skipped here because they're obvious. Just say "Yes" or "OK" on all such prompts.
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord