Search the Community
Showing results for tags 'Flash'.
Found 4 results
Mateos MVRMC-16 Vectrex USB Flash Cart in Cart Shell + MVBD Burner Programmer https://www.ebay.com/itm/323622304376? Mateos MVRMC-16 Vectrex USB Flash Cart in Cart Shell + MVBD Burner Programmer Feel free to make offers outside of the eBay listing. #Vectrex #USB #Flash #Cart https://www.ebay.com/itm/Mateos-MVRMC-16-Vectrex-USB-Flash-Cart-in-Cart-Shell-MVBD-Burner-Programmer/323622304376
Is there a way to get games to save data when using the Atarimax MyIde 2 ? When using the MyIde 2, I noticed that when i play a game which saves high scores, etc, it isn't there the next time i power up and load the game again via MyIde 2. Do programs running on the computer ( in this case i use with 800XL and 130XE machines) have the ability to write data to the SD card in the Myide 2? Thanks! -Eric
Hi, I´ve made some time ago a little project, but haven´t found the time to finish it. The hardware is ready and works fine, but the important thing - the flash utility - is not ready. And without a flashtool this PCB is useless. So I´m looking for somebody who agree to write the flash utility for this little piece of hardware. I´m not the best 6502 coder, and, I need too much time. I have so much other ongoing projects - I would be afraid that this project will never be finished. The special thing about this PCB is that it fits in the genuine brown Atari cartridge shells with metal plate on the back. It can be switched between 8 KB mode and 16 KB mode. Banks are selected by address lines, so an access to $D500-$D57F would select bank 0...127. Any access to $D580-$D5FF switches the cart off. This is the same scheme (for 8 KB) like AtariMax did. So you can use this PCB in two ways: - Flashing a 1 MByte (8 Mbit) AtariMax Workbork Image to it - Flashing one of the several ROM compilations floating around (mostly "63-in-1" called) using the 16 KB mode Write-access can be denied by removing the "WRITE" jumper. For bad flash processes the DISABLE jumper can be set during power-on to prevent the computer from locking while start-up if the flash-ROM content is bad. So the job to do is coding a flash utility for the Hyuandai HY29F800BG flash chip (it´s 1 MByte x 8 selected, this flash can be accessed in 8 or 16 bit). I would prefer a solution doesn´t require a memory expansion, should be possible, because this flashchip is very versatile in programming. Of course I would provide 2-3 fully populated PCBs free or charge and shipping with an example content (flashed before with an external programmer) Anybody interested? Jurgen
I have literally about 3 Jaguar Rom's that I would like flashed to carts (homebrews that have been made available for personal use) not production games or anything piratey. I've been doing a LOT of research and it seems like (flashing EPROM) is something thats going to be a little out of my capability. These are for personal use and never to be re-sold. Would anyone on here be willing to help me out, expenses covered? Please PM me! Thanks