Search the Community
Showing results for tags 'modded'.
-
Adam Koralik with a 3DO he had modded. Definitely worth checking out and seeing all that he did should one consider using (somewhat) original hardware going forward.
-
For sale here is a Japanese PS1 7000 model with the PSIO mod/cartridge. Everything works as it should, the CD drive even still works. I'm asking $200 for it, shipped within the US only. No controllers or cables are included. Since this is a Japanese machine, it uses a non-polarized figure 8 power cord. I'm also open to trading for any of the Champ games 2600 homebrews or a Harmony Encore cart.
-
- playstation 1
- flash cart
-
(and 1 more)
Tagged with:
-
Hey everyone, making the difficult to decision to part with my Colecovision stuff, though some of it I haven't had long. I wanted to give AA the chance to nab these before I list them. Right now these are all 'for offer' - I need to check current market values before i can add prices. 1. I have a CIB composite modded Colecovision. Box in in poor shape (its missing both sets of flaps so its more like a slip cover), but its there. The system was modded by AA's very own Crossbow just a few months ago, and I was very happy with its quality. The controllers have had ball tops added to them by him - note that this prevents the controllers from being able to put in the system box - too tall. Includes a Donkey kong cart + manual. No system manual. Has the original brick AC which works. No system manual. 2. CIB Homebrew games. a. Rally X (pixelboy) - the box has a ding in the corner
- 4 replies
-
- collecovision
- homebrew
-
(and 2 more)
Tagged with:
-
My feedback thread: http://atariage.com/forums/topic/277827-derfunkenstein/ My Heatware profile: https://www.heatware.com/u/55794/to Currently Available Items in this thread: Photos: https://imgur.com/a/T3joobY Feel free to make offers via PM. --nothing here, all sold-- Previously Sold Items in this thread: PC Engine Core Grafx system sold to RockyRaccoon Custom-built RGB SCART cable (no internal mod needed, made by fidde_se on eBay) sold to scooby105 Turbo Everdrive + 4GB SD card (ROMs not included, to be in compliance with Atari Age policies) sold to scooby105 OSSC-based RGB HDMI bundle. sold to -^Cro§Bow^- USB-GDROM modified Dreamcast bundle. sold to Punisher5.0 Genesis with MD Everdrive bundle. - sold to chicgamer Playstation 2 SCPH-39001 lot. Shipping included in USA. $90 - sold to RockyRaccoon Modded Saturn lot. Shipping included in USA. $130 - sold to Kid Ice HD Boot fat PS2 SCPH-50001 with Network adapter and 1TB HDD: $110 shipped - sold to entryan Fat PS2 50001 unit (no firewire, quieter fan) - Disc drive works great, though the system does have some marks on it seen clearly in pictures Sony official network adapter 1TB SATA Seagate 2.5" hard drive with the necessary IDE to SATA adapter and cables Configured with Free HD Boot (like Free MC Boot, but boots off the hard drive, no memory card space required) 2x 8MB memory cards (one official Sony, one clone) 2x black Dual Shock 2 controllers (L2 button on one sticks a little, other is perfect) 1x clear Dual Shock controller Sony 4-player adapter Component video cable (also does Component for PS3, XBox 360, and Wii) Composite video cable Power cord Soft-modded Wii lot - NO GAMES INCLUDED! $90 shipped with 128GB drive sold to FikapPacMan GameCube-compatible Wii system, disc drive works great and fully functional Soft-modded and boots directly to USB Loader GX. Has Neek2o configured with emunand on USB drive 64GB or 128GB Samsung USB 3.0 drive - works great with this system, will have a fresh emunand for loading your stuff 2GB SD card needed for booting USB Loader, PriiLoader goes straight to USB Loader when everything is connected Blue Wii remote with blue cover (no motion plus) White nunchuk controller Black Classic Controller Black Wavebird-clone style GameCube controller "128MB" GameCube memory card (that's 128 megabits, or 16MB) Component video cable Original power supply Nintendo Sensor bar
-
Hello AA, I need to make some room and get rid of some of my lower on the totem pole consoles. These have served me well and need to find loving homes. Shipping within the US only. First is a composite modded Nintendo Famicom. The composite comes out of a 3.5mm jack that is placed where the RF output was, making it look near stock. I also have the Japanese equivalent of the NES advantage along with a bundle of loose carts. SOLD Scroll down for two CIB Intellivision homebrew carts and S-video Genesis 3, both available.
-
Hey. I'm looking for an NES controller that's been modified for use on a 2600. I'm not sure where to look. They don't seem very popular. I could be wrong though. Advice?
- 2 replies
-
- nes
- controller
- (and 4 more)
-
I knocked another project off the list today by finishing up my 7800 s-video mod. I also recapped it and added RCA AV jacks. I bought longhornengineer's video board on eBay and highly, highly recommend buying from them. The s-video quality is absolutely superb. It's crisp and colorful, and still glows with that original warmth. The 7800 went from being the absolute worst video quality of any console I own, to nearly the top of the list. So far I've only been able to test it plugged straight to my TV, and it will improve when I'm able to run it through my Extron DVS-204 to a T-SLG. The mono audio is also excellent, but the composite video is nowhere near as good as s-video. Both are a huge improvement over RF obviously. I mounted the AV jacks on the back of the console, which is something I hadn't seen done before. If you go this route, make sure to get the exact s-video jack that I used. There isn't enough space inside that area for standard s-video jacks.
- 6 replies
-
- atari 7800
- 7800
- (and 7 more)
-
From the album: Hardware
Size comparison of Dan "The Trak-Ball Man" Kramer's famous Atari 5200 Trak-Ball Controller with my SNK NeoGeo Arcade Joystick modded by Grips03 to work with the Atari 5200.© Lynxpro
-
From the album: Hardware
Another picture of my modded SNK NeoGeo Arcade Joystick for use with the Atari 5200, courtesy of the mad skillz of Grips03. Do yourself a favor and buy one!© Lynxpro
-
From the album: Hardware
This was an ePay score. One of the.golden.ax's NES Pads modded for Atari 7800 compatibility and its appearance changed to match the 7800 console better.© Lynxpro
-
From the album: Hardware
This is my secondary 7800 console which is custom modded by my one true love.© Lynxpro
-
From the album: Hardware
This is my customized SNK NeoGeo arcade joystick modded by Grips03 to work with my Atari 5200. It works like a champ. Get one!© Lynxpro
-
Hello everyone, I know this may be a long shot.. but I am a huge fan of DoubleDown's work here in the past. With that said, I am looking to buy a CV console that was modded by him. His consoles typically had new pushbutton switches installed, so they definitely stand-out from others. His Super ColecoVision has multiple outputs and the HDMI I especially find useful. That would be THE console I'd use mainly for now on, besides a couple others that are "special" to me. The Mini CV's were very cool and i'd love to have one of those overall. Just PM me if there is anyone that would (hopefully) be willing to part with one.. Thanks,
-
- colecovision
- console
-
(and 3 more)
Tagged with:
-
I have some Atari Stuff for sale. I will accept Nintendo related trades. I'm especially interested in SNES. Prices are before shipping. Please e-mail me for a shipping quote. If you have any questions please let me know. S-video Modified Atari 5200 with games, controllers, accessories $150 I have for sale an s-video modified Atari 5200 with AC adapter, weird RF box thing, two controllers, two for parts controllers, and games. The games are as listed: Centipede Mario Bros Frogger Space Invaders x2 RealSports Football Vanguard Moon Patrol Super Breakout Joust Countermeasure Qix Centipede Ms. Pac-Man Jungle Hunt Real Sports Tennis Defender Pole Position Dig Dug Pac-Man Realsports Soccer 2x Atari 7800 Brick Style Euro Controllers $15 each, $25 for both 500XJ Epyx Clicky Microswitch Atari 2600 Controller $15
-
For Sale Atari 2600 Four Switch Woody We built this Atari for our personal use; however, have decided to offer it for sale here. It has been AV modded with Batari's board Blue LED power light added (so we wouldn't forget to shut the thing off!) Pause button added It has also been thoroughly cleaned and tested; any worn and/or damaged components have been replaced. There are no chips, cracks, gouges or major scratches on the body. The pause button: The new AV jacks: We are asking $105, which includes free shipping to the lower 48 US This is for the console only nothing else is included PM if interested!!
- 12 replies
-
- atari
- atari 2600
-
(and 7 more)
Tagged with:
-
These Atari Flashback II's have been modded to take Atari 2600 cartridges! We are selling these Modded Atari Flashback II's for $85.00 with free shipping! This includes the modded console and AC adapter Joysticks are available for $5.00 each You can feel confident in ordering with us as we have 100% positive feedback on each of our eBay accounts: wood_creations99 atariguy1021 If you are interested in ordering, or if you have any questions PM us
- 17 replies
-
- Atari Flashback II
- Flashback 2
- (and 6 more)
-
This lot has been sold!