sf game doctor ac adapter

[311fan]

anyone familiar with the appropriate ac adapter to use with this game copier?

[CGQuarterly]

I believe it just takes a standard NES/Genny/TG16 adapter. At least the one I just sold used those, and it was the SF7.

 

Chris

[JB]

I believe it just takes a standard NES/Genny/TG16 adapter. At least the one I just sold used those, and it was the SF7.

 

Chris

Warning! Warning! Warning!

Unlike Genesis and TG16 AC adapters, which output 9V DC, NES power adapters output 9V AC and will DESTROY most devices you may choose to connect them to!

They are NOT a suitable adapter for most devices!

[oldgames]

I believe it just takes a standard NES/Genny/TG16 adapter. At least the one I just sold used those, and it was the SF7.

 

Chris

 

 

I bought this SF7 from Chris and am using one of the generic 3 in one power supplies that run SNES, NES, and Genesis. These put out 9v DC and this is definitely what the unit needs. On the bottom of the Game Doctor is says DC in 9 - 12 v 850ma - 1.5a.

 

Dave

[311fan]

I believe it just takes a standard NES/Genny/TG16 adapter. At least the one I just sold used those, and it was the SF7.

 

Chris

 

 

I bought this SF7 from Chris and am using one of the generic 3 in one power supplies that run SNES, NES, and Genesis. These put out 9v DC and this is definitely what the unit needs. On the bottom of the Game Doctor is says DC in 9 - 12 v 850ma - 1.5a.

 

Dave

 

thanks for the info. i decided to use the genesis 1 power supply. fits and works well on my GD3. thanks!!