Roydea6 Posted May 4, 2009 Share Posted May 4, 2009 Assembled unit just showed up, it looks fantastic! Ditto for here also. Quote Link to comment Share on other sites More sharing options...
kurtm Posted May 4, 2009 Share Posted May 4, 2009 Assembled unit just showed up, it looks fantastic! Ditto for here also. Me too. My wife's words were: "I guess I know what you'll be up to tonight." Alright, her first words were "Take off the case" so we could see inside. I wanted to bask in the pretty first Quote Link to comment Share on other sites More sharing options...
98PaceCar Posted May 5, 2009 Share Posted May 5, 2009 Mine showed up as well. Haven't had a chance to try it yet, but it looks VERY good! Quote Link to comment Share on other sites More sharing options...
atarian63 Posted May 5, 2009 Share Posted May 5, 2009 Mine showed up as well. Haven't had a chance to try it yet, but it looks VERY good! Crap, mine shipped but Ohio mail service sucks,nothing yet. Quote Link to comment Share on other sites More sharing options...
tjb Posted May 5, 2009 Share Posted May 5, 2009 My fully assembled unit arrived today as well! Very professionally done! tjb Quote Link to comment Share on other sites More sharing options...
+bf2k+ Posted May 5, 2009 Share Posted May 5, 2009 Got mine too! Been playing with it all night. It took me a little while to figure it out but I got it going now. Any way to edit that cfg file or is it necessary? Quote Link to comment Share on other sites More sharing options...
c0nsumer Posted May 5, 2009 Author Share Posted May 5, 2009 Mine showed up as well. Haven't had a chance to try it yet, but it looks VERY good! My fully assembled unit arrived today as well! Very professionally done! Thanks very much. I'm glad to hear they are arriving as well. I just ordered the parts to build five more, just in case a few more people want some. Quote Link to comment Share on other sites More sharing options...
c0nsumer Posted May 5, 2009 Author Share Posted May 5, 2009 Got mine too! Been playing with it all night. It took me a little while to figure it out but I got it going now. Any way to edit that cfg file or is it necessary? It's actually done by using the save config stuff in the SDrive util. If you read this PDF, on page 3, check out the Control+W command. It lets you save off the config. Also, if you boot it while holding shift you have the option to bypass the config. Basically, everything is in those docs there, and I just put the latest SDRIVE.ATR on the SD cards for convenience, and so that I could test each card with each device to be sure they worked together. Quote Link to comment Share on other sites More sharing options...
+remowilliams Posted May 5, 2009 Share Posted May 5, 2009 Let me make sure I understand something correctly. Although the SDRIVE has four drives that can be emulated, there is no way to swap images between drives on the fly, correct? You can clearly swap 'what is D1' with the three other drives using the front panel, but not actually say swap the image in D2: for the image in D3: on the fly. Quote Link to comment Share on other sites More sharing options...
c0nsumer Posted May 5, 2009 Author Share Posted May 5, 2009 Let me make sure I understand something correctly. Although the SDRIVE has four drives that can be emulated, there is no way to swap images between drives on the fly, correct? You can clearly swap 'what is D1' with the three other drives using the front panel, but not actually say swap the image in D2: for the image in D3: on the fly. Unless I'm really mistaken, that's correct, without having an app which can talk to the SDrive and do it for you. (Hence CPU's protocol documentation...) You can have D1 through D4, or swap other drives into D1, or swap what I consider a D0 (SDRIVE.ATR, the boot volume) in by pressing BOOT. Quote Link to comment Share on other sites More sharing options...
raster/c.p.u. Posted May 5, 2009 Share Posted May 5, 2009 (edited) Let me make sure I understand something correctly. Although the SDRIVE has four drives that can be emulated, there is no way to swap images between drives on the fly, correct? You can clearly swap 'what is D1' with the three other drives using the front panel, but not actually say swap the image in D2: for the image in D3: on the fly. Hello. Yes, there is possible to swap D1: with [bOOTimageSDRIVE.ATR] or [D1:] or [D2:] or [D3:] or [D4:]. But if you switch the SDrive id number to 2 (or 3 or 4), then D2: (or D3: or D4:) is main drive number for swaping with other drives. (Of course, if main drive number is different than D1:, then booting of SDRIVE.ATR doesn't work, because Atari is booting from D1: by default.) Greetings, raster/c.p.u. Edited May 5, 2009 by raster/c.p.u. Quote Link to comment Share on other sites More sharing options...
+bf2k+ Posted May 5, 2009 Share Posted May 5, 2009 Got mine too! Been playing with it all night. It took me a little while to figure it out but I got it going now. Any way to edit that cfg file or is it necessary? It's actually done by using the save config stuff in the SDrive util. If you read this PDF, on page 3, check out the Control+W command. It lets you save off the config. Also, if you boot it while holding shift you have the option to bypass the config. Basically, everything is in those docs there, and I just put the latest SDRIVE.ATR on the SD cards for convenience, and so that I could test each card with each device to be sure they worked together. The SDRIVE_en.pdf file that I had is older - the Ctrl-R & Ctrl-W cmds are not listed in it. Quote Link to comment Share on other sites More sharing options...
c0nsumer Posted May 5, 2009 Author Share Posted May 5, 2009 (edited) If anyone is interested, I've posted the end panel artwork as sent off for manufacturing, and made it available under CC-ByAttribution. Please see the Design Documents section of the SDrive NUXX page for the files, checksum, license info, etc. Note that these files are in Adobe Illustrator format, but they may be opened and printed with Adobe Reader. Also, I'll be releasing the CadSoft EAGLE files under the same license as soon as I get a chance to give them one more look and be sure they are ready to go. Edited May 5, 2009 by c0nsumer Quote Link to comment Share on other sites More sharing options...
c0nsumer Posted May 5, 2009 Author Share Posted May 5, 2009 The SDRIVE_en.pdf file that I had is older - the Ctrl-R & Ctrl-W cmds are not listed in it. Ah, yeah. When the SDRIVE.ATR was updated the config saving stuff was added, thus the documentation was updated along with it. Quote Link to comment Share on other sites More sharing options...
Foster Posted May 6, 2009 Share Posted May 6, 2009 cOnsumer, I received my full-assembled unit the other day and must give you major props for a job well done. Your incarnation of the Sdrive is fabulous. It is completely professional in appearance and the layout is very well thought out. It is simply a pleasure to use. Kudos to the original Sdrive developers as well. The fine Sdrive software is very straight-forward and practical. Thank you all! ... Steve Quote Link to comment Share on other sites More sharing options...
+Philsan Posted May 8, 2009 Share Posted May 8, 2009 SDrive arrived today in Switzerland! Quote Link to comment Share on other sites More sharing options...
c0nsumer Posted May 9, 2009 Author Share Posted May 9, 2009 I received my full-assembled unit the other day and must give you major props for a job well done. Your incarnation of the Sdrive is fabulous. It is completely professional in appearance and the layout is very well thought out. It is simply a pleasure to use. Kudos to the original Sdrive developers as well. The fine Sdrive software is very straight-forward and practical. Thank you very much. Quote Link to comment Share on other sites More sharing options...
c0nsumer Posted May 9, 2009 Author Share Posted May 9, 2009 SDrive arrived today in Switzerland! Wow, great to hear. That was surprisingly fast. International shipments normally take ~2 weeks, in my experience. Thanks for letting me know! -Steve Quote Link to comment Share on other sites More sharing options...
spookt Posted May 9, 2009 Share Posted May 9, 2009 (edited) PCBs, panels and chips arrived in the UK this morning. All the components arrived yesterday and I'm supposed to be tidying the garden today PS - The panels and boards look awesome. Great work Edited May 9, 2009 by spookt Quote Link to comment Share on other sites More sharing options...
+bf2k+ Posted May 9, 2009 Share Posted May 9, 2009 PCBs, panels and chips arrived in the UK this morning. All the components arrived yesterday and I'm supposed to be tidying the garden today Maybe it'll rain?? Quote Link to comment Share on other sites More sharing options...
+Philsan Posted May 9, 2009 Share Posted May 9, 2009 (edited) PCBs, panels and chips arrived in the UK this morning. All the components arrived yesterday and I'm supposed to be tidying the garden today Luckily I have already done this annoying task! Edited May 9, 2009 by Philsan Quote Link to comment Share on other sites More sharing options...
Atari8guy Posted May 9, 2009 Share Posted May 9, 2009 Has anyone ordered the parts from DigiKey? What does that set you back.....? Quote Link to comment Share on other sites More sharing options...
spookt Posted May 9, 2009 Share Posted May 9, 2009 (edited) PCBs, panels and chips arrived in the UK this morning. All the components arrived yesterday and I'm supposed to be tidying the garden today Maybe it'll rain?? It's raining !!!! Started a half hour ago !! Edited May 9, 2009 by spookt Quote Link to comment Share on other sites More sharing options...
+bf2k+ Posted May 9, 2009 Share Posted May 9, 2009 PCBs, panels and chips arrived in the UK this morning. All the components arrived yesterday and I'm supposed to be tidying the garden today Maybe it'll rain?? It's raining !!!! Started a half hour ago !! Heheheh... I caused that! (I'll send you a bill ) Quote Link to comment Share on other sites More sharing options...
spookt Posted May 9, 2009 Share Posted May 9, 2009 PCBs, panels and chips arrived in the UK this morning. All the components arrived yesterday and I'm supposed to be tidying the garden today Maybe it'll rain?? It's raining !!!! Started a half hour ago !! Heheheh... I caused that! (I'll send you a bill ) Thanks - however it stopped about 10 minutes later and I was sent back outside :( Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.