Ogma Posted March 14, 2009 Share Posted March 14, 2009 So I got this here 800XL and it is misbehaving like a bad chihuaha! First of all, I've noticed that wiggling the monitor cable affects the display, so I'm probably looking at repairing that soon... Second, when you boot up, you DO get a blue screen, but NO basic/READY prompt. I did try booting with a BASIC cart and that seemed to work. Was the internal BASIC somehow disabled??? Third, some cartridges work... Others do not. Any thoughts based on the above symptoms??? Quote Link to comment Share on other sites More sharing options...
Tickled_Pink Posted March 14, 2009 Share Posted March 14, 2009 The only thing I can think about is that some of the carts are 400/800 only and won't work without a translator disk. Are you holding down OPTION when booting? That disables BASIC. But if that was the case then you'd go into self-test if you had no disk drive attached. Bad BASIC ROM maybe? Quote Link to comment Share on other sites More sharing options...
Ogma Posted March 14, 2009 Author Share Posted March 14, 2009 The only thing I can think about is that some of the carts are 400/800 only and won't work without a translator disk. Are you holding down OPTION when booting? That disables BASIC. But if that was the case then you'd go into self-test if you had no disk drive attached. Bad BASIC ROM maybe? Well, the carts tested on this machine work perfectly fine on my 130XE and 65XE... Quote Link to comment Share on other sites More sharing options...
+David_P Posted March 14, 2009 Share Posted March 14, 2009 Have you cracked the hood yet? Sounds like you may have a different OS installed, with reversed OPTION for boot, and possibly some other changes. Quote Link to comment Share on other sites More sharing options...
candle Posted March 15, 2009 Share Posted March 15, 2009 do you get any sound on those carts you're able to run? if not you might be facing pokey replacement for xl/xe machine boot without or with damaged pokey on board will end up on blue screen with cursor at corner no sound, no boot error, just cursor on blue screen Quote Link to comment Share on other sites More sharing options...
+skr Posted March 15, 2009 Share Posted March 15, 2009 (edited) I get a blue screen without "READY"-Prompt when I boot without the BASIC Chip (it´s the one above the ROM). Open the computer and check, if the chips are socketed or not. Slightly lift all socketed chips and then firmly push them down. Especially BASIC and ROM. If you have socketed ROM and BASIC it is easy and cheap to replace the original chips. Edited March 15, 2009 by skr Quote Link to comment Share on other sites More sharing options...
Ogma Posted March 15, 2009 Author Share Posted March 15, 2009 Opened it up, pulled and returned the BASIC chip (CO60302A-29) and all is well (so far). ROM and RAM all appear fine according to Self Test. Thanks for the suggestion! ~Scott I get a blue screen without "READY"-Prompt when I boot without the BASIC Chip (it´s the one above the ROM). Open the computer and check, if the chips are socketed or not. Slightly lift all socketed chips and then firmly push them down. Especially BASIC and ROM. If you have socketed ROM and BASIC it is easy and cheap to replace the original chips. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.