RangerG Posted May 27, 2009 Share Posted May 27, 2009 Well, I left my Colecovision with the power on (I don't know how long, a few days?). There is no picture now. What could have happened? Burned out power supply or burned out something in the console? It may even not be related to the power being on, but that's what I suspect. Anyone else done this before? Quote Link to comment Share on other sites More sharing options...
doubledown Posted May 27, 2009 Share Posted May 27, 2009 This wasn't my modded ColecoVision was it? If so, I'd first check to see if the RF output still works. If so, then the video circuit is blown. If even through RF, the output is still black, there's almost no way to tell. I would venture to guess that either the CPU or VDP is blown, if there is no visable output at all. Quote Link to comment Share on other sites More sharing options...
RangerG Posted May 27, 2009 Author Share Posted May 27, 2009 Don't worry - it's not yours. Hmmm -- I'll look closer. -RG Quote Link to comment Share on other sites More sharing options...
darthkur Posted May 27, 2009 Share Posted May 27, 2009 I'm sorry to hear that. I hope it's fixable. The painful lesson learned here I believe is to always unplug your consoles after each use. Quote Link to comment Share on other sites More sharing options...
RangerG Posted May 27, 2009 Author Share Posted May 27, 2009 Or - get Doubledown to mod a LED power light into it :-). I have never unplugged my consoles each time, but that's a good idea. I think I'll plug my consoles into a separate power strip that is accessible (easier to turn everything on and off). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.