Jump to content
IGNORED

Pong arcade schematic


27ace27

Recommended Posts

  • 2 weeks later...

I am using this schematic of the PONG arcade system, http://www.atarihq.com/danb/files/PongSchematic.pdf , but have some questions. do the resistors like the one on the HSYNC board hooking up to +5V have any specific value? there isn't one on any schematic I can find.

 

Those resistors are pull-up resistors. They are holding the particular inputs at a logic high level. Pull-up resistors usually range in value from 1k ohm to upwards of 10k ohms. You can safely use 2.2k or 2200 ohm (red-red-red-gold - 4band, red-red-black-brown-gold - 5band).

 

Glenn

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

I am using this schematic of the PONG arcade system, http://www.atarihq.com/danb/files/PongSchematic.pdf , but have some questions. do the resistors like the one on the HSYNC board hooking up to +5V have any specific value? there isn't one on any schematic I can find.

 

Those resistors are pull-up resistors. They are holding the particular inputs at a logic high level. Pull-up resistors usually range in value from 1k ohm to upwards of 10k ohms. You can safely use 2.2k or 2200 ohm (red-red-red-gold - 4band, red-red-black-brown-gold - 5band).

 

Glenn

 

Thank you very much! that is exactly what I needed. :D

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...