thegamezmaster Posted September 14, 2010 Share Posted September 14, 2010 Newbie Atari Lynx owner here. Just got a Lynx II with no power supply. System works on batteries and was wondering is there any other power supply from a different handheld work with it? Got a whole box of different ones but not sure where to go from there. Anyone help as to what else will work. Searched the web but couldn't find a definative answer. Thanks. Quote Link to comment Share on other sites More sharing options...
Atari_afternoon Posted September 15, 2010 Share Posted September 15, 2010 (edited) The one of the Sega Game Gear does not - diameter of the Lynx´ socket is too small Edited September 15, 2010 by Atari_afternoon Quote Link to comment Share on other sites More sharing options...
bradjewell Posted September 15, 2010 Share Posted September 15, 2010 Was going to post a nmew topic on here, but this post works... I was wondering along these same lines. I know the voltage: 9vdc, 1a. I know the center pin is positive. I was wondering if someone could give me the plug diamater. I've seen some out there for 2.1mm and 2.5mm , wondering if they would work. Thanks in advance for any help. Quote Link to comment Share on other sites More sharing options...
thegamezmaster Posted September 16, 2010 Author Share Posted September 16, 2010 I was looking on the Lynx II and on the case it says 9 volts DC 3.0 W. Was looking at ac adapters on ebay and the atari one's say output is 9 volts dc 1.0 amp. Why the difference? Quote Link to comment Share on other sites More sharing options...
eightbit Posted October 5, 2010 Share Posted October 5, 2010 I tried two standard universal power supplies today. One was a Jensen set at 9V center positive (600mA) and it works fine. Tried another generic at 9V center positive (500mA) and that works fine too! I am pretty certain most universals with a 500mA and above rating (not to exceed 1A) set at 9V with center (tip) positive (VERY IMPORTANT) will work just fine. The Jensen is available at any Best Buy location. Quote Link to comment Share on other sites More sharing options...
Atari_afternoon Posted October 5, 2010 Share Posted October 5, 2010 I was wondering if I should solder a new (fitting) plug to the Sega Game Gear one...the specifics (voltage, Ampere) would just be allright. Quote Link to comment Share on other sites More sharing options...
semicolo Posted October 15, 2010 Share Posted October 15, 2010 You can go above 1A, it's 9V that mustn't be exceeded. I use a 7.5V transformer, but it's plugged to the batteries contacts, not the normal psu socket. Quote Link to comment Share on other sites More sharing options...
kokoa87 Posted August 27, 2022 Share Posted August 27, 2022 did an atari lynx did it come in the box origianlly or was it a seprate buy? Quote Link to comment Share on other sites More sharing options...
+Stephen Moss Posted August 29, 2022 Share Posted August 29, 2022 My Lynx 2 did not come with one. There would be no room for it in the box. Quote Link to comment Share on other sites More sharing options...
sirlynxalot Posted August 31, 2022 Share Posted August 31, 2022 I bought a nib lynx ac adapter from best electronics years ago. Interestingly, the picture of the ac adapter on the box (which is like a hand drawing rather than a photo) does not match the shape of the actual ac adapter. Quote Link to comment Share on other sites More sharing options...
JagChris Posted September 1, 2022 Share Posted September 1, 2022 I have this one then I bought one with a 5 foot cord and a right angle plug in. It won't let me link just search for lynx 1&2 compatible power supplies. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.