SlowCoder #1 Posted October 10, 2010 I was bored tonight. After dinner, not much to do but watch kiddie shows with my children. I decided that I'd create a guide to CV disassembly, based on my *limited* experience. A Guide to Disassembling the ColecoVision.pdf Please take a look and let me know what you think. Constructive comments and critiques are welcome. 1 Quote Share this post Link to post Share on other sites
+5-11under #2 Posted October 10, 2010 Looks about right to me. Quote Share this post Link to post Share on other sites
Yurkie #3 Posted October 10, 2010 One major thing you did wrong was lay the stuff out on a blanket. Static electricity can destroy the board. Ideally when working on electronics an anti-static wrist strap should be worn and item should be placed on a anti-static work mat. 2 Quote Share this post Link to post Share on other sites
SlowCoder #4 Posted October 10, 2010 One major thing you did wrong was lay the stuff out on a blanket. Static electricity can destroy the board. Ideally when working on electronics an anti-static wrist strap should be worn and item should be placed on a anti-static work mat. Very right. I actually meant to add that into the guide. I'll wait a while to see if anyone else has ammendments, then I will update the guide. Quote Share this post Link to post Share on other sites
PAC-MAN PRIME #5 Posted October 10, 2010 Great tutorial! Thanks for sharing it! I guess I need to get an anti-static mat too now. :-) Quote Share this post Link to post Share on other sites
SlowCoder #6 Posted October 12, 2010 (edited) I haven't had any more update requests in the last couple days, so I'll consider that after I've added "danger of static" to the guide, it will be complete. Is this something that you guys think should be stickied, lest it be lost to the rubble of past threads? Or does it suck, and is the same as the thousands of others out there on the Interweb, and you guys are just too nice to tell me I wasted my time? Edited October 12, 2010 by SlowCoder Quote Share this post Link to post Share on other sites
patbb #7 Posted October 12, 2010 Thanks, this will be very helpful. Quote Share this post Link to post Share on other sites
+5-11under #8 Posted October 12, 2010 I haven't had any more update requests in the last couple days, so I'll consider that after I've added "danger of static" to the guide, it will be complete. Is this something that you guys think should be stickied, lest it be lost to the rubble of past threads? Or does it suck, and is the same as the thousands of others out there on the Interweb, and you guys are just too nice to tell me I wasted my time? It's all available with a search. I'll also link to it from another thread. Quote Share this post Link to post Share on other sites
SlowCoder #9 Posted November 13, 2010 Updated guide: A Guide to Disassembling the ColecoVision (Rev 1).pdf Added some important information recommended by some of our knowledgeable folks here. 3 Quote Share this post Link to post Share on other sites