No signal?

[0078265317]

I got a 6 switch sears tele from ebay. Hooked up everything and no picture. On chanle 3 whenI power looks like something wavy line and messed up screen but still snow. Looks like it is powering on but no picture. Using universal ac adapter but made sure 9v and positive tip. But no channel selector switch.

 

What chanel then is my sears telel 6 switch supposed too be on to get signal.

[0078265317]

Never mind I ran auto scan on my tv and found the pictue. Muche better. Still a little fuzy even if directly plugged into backof tv but not bad so thanks. Now I just have to get some controllers and an official ac adapter and I'm alll set. I'll ask a friend if he still has his and see if I can have them.

 

The power and controllers were all the same for 4 and 6 switch right? And does it matter I have sears tele. Or same 2600 regular adapter and controllers would work?

[The Usotsuki]

The controllers were shared between a bunch of systems and not even just different models of 2600. Shouldn't be a problem.

[0078265317]

The controllers were shared between a bunch of systems and not even just different models of 2600. Shouldn't be a problem.

 

 

And what about ac adapter. My universal is only 300mah. That might explain the grainy picture. Does sears tele work with regular 2600 adapter or has a special ac?