anakedg Posted September 10, 2011 Share Posted September 10, 2011 Hey guys I'll get right into the problem. I have a 2600 Jr. that I am having issues with the reset button randomly activating without being touched as in gravity will eventually get it to press. Sometimes it is one press but others it is as if the button is being held down. I tried to take it apart and take a look and it looks like it is traced contacts in there. any advice on how I can fix this problem? Thanks for any/all input. Jarrod Quote Link to comment Share on other sites More sharing options...
Deja-Q Posted September 11, 2011 Share Posted September 11, 2011 When you remove the switch cab does this happen then too? If yes, there must be somethong wrong with the foam thing under the cab. Maybe it's too flat and the switch is pressed nearly all the time? Quote Link to comment Share on other sites More sharing options...
anakedg Posted September 15, 2011 Author Share Posted September 15, 2011 It seems that the contacts are too close i have taken apart the console but not taken the button off yet, which is what i am guessing you are calling the cab? So you are saying i should take that part off and remove the trace patterns and look for a problem? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.