Jump to content
IGNORED

SDrive Micro for 8-bit Atari


santosp

Recommended Posts

Hello to all there icon_smile.gif, and Happy New Year!

I will let you know about the limited production of original SDrive of C.P.U. team.
I called SDrive Micro because due to its small size. My version is a redesigned of original project but to fit in a small box 70x50x20mm. The pcb is dual layer with smd only components, including the micro-controller. The SIO cable is permanent connected to device, and the ID switch can be set from a small hole at bottom. SD socket is a push on - push off type, and inside exist a header for any future programming.
Decal for cost reasons doesn’t exist, so anyone can add whatever you want. If you want to design one, I can provide in pdf the “image” from CAD.

Ok I ask for that as you see it in pictures 45 euro + shipping cost. Payment through Paypal. Any Paypal fee also to buyer.
I can ship that as simple irregular post registered or not. In case of “not registered” buyer must add in its Paypal payment this note “ I declare that the seller is not responsible if I do not ever receive the product and if it is broken.”

Thank you all for looking. icon_winking.gif

post-23371-0-63918300-1450971210_thumb.jpgpost-23371-0-65233900-1450971212_thumb.jpgpost-23371-0-84173200-1450971214_thumb.jpgpost-23371-0-62584200-1450971216_thumb.jpgpost-23371-0-67277400-1450972215_thumb.jpgpost-23371-0-66817900-1450972224_thumb.jpgpost-23371-0-45455500-1450971218_thumb.jpgpost-23371-0-90114100-1450971219_thumb.jpgpost-23371-0-58244000-1450971221_thumb.jpgpost-23371-0-00038300-1450972218_thumb.jpgpost-23371-0-22206900-1450971223_thumb.jpgpost-23371-0-30040300-1450972221_thumb.jpg

Edited by santosp
  • Like 2
Link to comment
Share on other sites

Thanks the Larry for his usefull questions. I respond here as to be visible from other members also.

 

- I have 10 units completed, tested and ready for shipping.

- I ship from Greece.

- As i write to my first post....- I can ship that as simple irregular post registered or not. In case of “not registered” buyer must add in its Paypal payment this note “ I declare that the seller is not responsible if I do not ever receive the product and if it is broken.”-

- The unit is complete boxed and with the SIO cable permanent attached to the device. The buyer will receive one item of what exact see in first photo with 4 devices.

 

Last my apologies to any tiny imperfection in the plastic box. You know is fully handmade for cost reasons. All the project became a main focus on quality construction, while the least cost to the buyer.

 

Thank you Larry.

Link to comment
Share on other sites

[quote name=Sub(Function(:))' timestamp='1325495368' post='2435655]

Will you sell on with out the cae and cable. I would like to fit this internally. If so what price?

 

Hi.

If I understand correctly you ask me if I sell without the cable and ??cae??? You mean the box?

Link to comment
Share on other sites

Member list with payments and shipping info.

 

rpc9943 Received the payment

sloopy Received the payment

mimo Received the payment

nama Received the payment

owen2471 Received the payment

rdemming Received the payment

Edited by santosp
Link to comment
Share on other sites

[quote name=Sub(Function( :))' timestamp='1325495368' post='2435655]

Will you sell on with out the cae and cable. I would like to fit this internally. If so what price?

 

Hi.

If I understand correctly you ask me if I sell without the cable and ??cae??? You mean the box?

 

Correct (I meant to write "case"). I just need the PCB with components fitted

Link to comment
Share on other sites

[quote name=Sub(Function( :))' timestamp='1325512265' post='2435718]

[quote name=Sub(Function( :))' timestamp='1325495368' post='2435655]

Will you sell on with out the cae and cable. I would like to fit this internally. If so what price?

 

Hi.

If I understand correctly you ask me if I sell without the cable and ??cae??? You mean the box?

 

Correct (I meant to write "case"). I just need the PCB with components fitted

 

I sent you pm!

Edited by santosp
Link to comment
Share on other sites

Member list with payments and shipping info.

 

rpc9943 Received the payment

sloopy Received the payment

mimo Received the payment

nama Received the payment

owen2471 Received the payment

rdemming Received the payment

Sub(Function( :)) Received the payment

Edited by santosp
Link to comment
Share on other sites

Member list with payments and shipping info.

 

rpc9943 Received the payment

sloopy Received the payment

mimo Received the payment

nama Received the payment

owen2471 Received the payment

rdemming Received the payment

Sub(Function( :)) Received the payment

frankie Received the payment

kheffington Wait for payment untill Wednesday

Link to comment
Share on other sites

Dear members of AtariAge community, a honesty BIG thank to all, who have embraced my efforts to this project. :) To be honest with you I will inform you the following.

 

The 15 first and maybe last items have now been sold locally in my Country Greece and here in AtariAge. I have preorders from mine here for 5 more devices, 1 interest from an other forum, and 1 more interest from Atari Age.

I will kindly ask if you want more devices please inform Me your "Trully" interest here official in sell thread. If finally seeing interest from at least 6 members from here, I can proceed with order of electronic components, and the maximum at 10 days to have the first devices to be ready for delivery.

I have in my possession yet 15 pcbs which are the last of this project. If there truly is interest, please register here. After I make a list from the members of this last 15 devices -10 maximum outside of Greece- budget.

 

Again a BIG thank you to all for your support, and AtariAge for its Hospitality! :thumbsup:

Edited by santosp
Link to comment
Share on other sites

Member list with payments and shipping info.

 

rpc9943 Received the payment

sloopy Received the payment

mimo Received the payment

nama Received the payment

owen2471 Received the payment

rdemming Received the payment

Sub(Function( :)) Received the payment

frankie Received the payment

kheffington Received the payment

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...