Pengwin Posted February 14, 2012 Share Posted February 14, 2012 Has anyone managed to connect to a BBS using Sio2OSX? I've been trying tonight with BobTerm and can't seem to get anywhere. Any help would be appreciated. Quote Link to comment Share on other sites More sharing options...
Marius Posted February 14, 2012 Share Posted February 14, 2012 Has anyone managed to connect to a BBS using Sio2OSX? I've been trying tonight with BobTerm and can't seem to get anywhere. Any help would be appreciated. How far do you get? Do you hear the 'beeeeeeeep' from the r: coming over to Bobterm? (If not: bobterm probably notifies you that there is no R: handler). make sure that you do not have another R: device attached to your atari (like atari 850 or blackbox or mio or whatever), since Bobterm will not download another R: driver if it is already in memory. Ok ... if you are 100% sure you succeeded in getting into bobterm with the things in mind I described above, type this: ATZ (press now return) if you see: OK your connection with Sio2OSX is ok. If not, try it again one or two times. After that OK, type this: ATDT <address of bbs> <portnumber> after ATDT there is a space after the address of the bbs also a space in case you want to give in a portnumber try this: ATDT bbs.inspiration-soft.com or ATDT bfbbs.dtdns.net or ATDT thunderdome.homeip.net 471 this should do the trick! Greetz M. Quote Link to comment Share on other sites More sharing options...
Pengwin Posted February 14, 2012 Author Share Posted February 14, 2012 Thanks Marius...it works now...not sure what I was doing wrong Quote Link to comment Share on other sites More sharing options...
+bf2k+ Posted February 14, 2012 Share Posted February 14, 2012 ATDT bfbbs.dtdns.net Actually I suggest: ATDT bfbbs.no-ip.com The first one may not always work since the IP address is subject to change randomly. 1 Quote Link to comment Share on other sites More sharing options...
+DarkLord Posted February 14, 2012 Share Posted February 14, 2012 You can run a small background daemon under Linux (or app under Windows) to take care of that. I use DDclient on my Kubuntu box for my BBS... It wakes up every 5 minutes, if there is an ip change, reports it to dyndns.org, if not, it goes back to sleep... Brilliant. Quote Link to comment Share on other sites More sharing options...
Pengwin Posted February 14, 2012 Author Share Posted February 14, 2012 (edited) Things are up and running now, so my apologies for to the sysops of the BBS's, I am like a kid in a sweetie shop :-) (Had to change that, the whisky is affecting my typing) Edited February 14, 2012 by Pengwin Quote Link to comment Share on other sites More sharing options...
+Stephen Posted February 14, 2012 Share Posted February 14, 2012 Things are up and running now, so my apologies for to the sysops of the BBS's, I am like a kid in a sweetie shop :-) (Had to change that, the whisky is affecting my typing) Hope to see you on a few of the BBSes I frequent. Quote Link to comment Share on other sites More sharing options...
+bf2k+ Posted February 14, 2012 Share Posted February 14, 2012 You can run a small background daemon under Linux (or app under Windows) to take care of that. I use DDclient on my Kubuntu box for my BBS... It wakes up every 5 minutes, if there is an ip change, reports it to dyndns.org, if not, it goes back to sleep... Brilliant. I run two different ones at the same time... one as a Windows service and the other is an app. But they are only as good as the update module currently functioning at DTDNS which is spotty sometimes as you may have seen. Quote Link to comment Share on other sites More sharing options...
+DarkLord Posted February 15, 2012 Share Posted February 15, 2012 Actually, I've seen fairly good results with my setup. At least we're up and available most of the time... Quote Link to comment Share on other sites More sharing options...
Marius Posted February 15, 2012 Share Posted February 15, 2012 I have a static IP number. That is rather common here in The Netherlands. Not in the USA I guess? Quote Link to comment Share on other sites More sharing options...
Fox-1 / mnx Posted February 15, 2012 Share Posted February 15, 2012 I don't think yours is static, as it's about with all Dutch ISP's. The fact it hasn't changed for even years still doesn't mean it's static. If for some reason their network goes down chances are your IP will change. Sometimes you can get a static IP at request, at an additional fee, but in that case the IP is mentioned at forehand on the contract deal you made with the ISP. Quote Link to comment Share on other sites More sharing options...
+DarkLord Posted February 15, 2012 Share Posted February 15, 2012 I have a static IP number. That is rather common here in The Netherlands. Not in the USA I guess? I'm with Suddenlink here in the US. Only available provider in my area. No DSL at all. I can get a static IP if I request they change my account from personal to business - with an accompanying price hike. So I stick to using scripts (a daemon) on my Linux box to just update whenever there is an IP change. Users never know it - they still just logon to "darkforce-bbs.dyndns.org", so it's all good. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.