SIO2SD Micro Order thread

[santosp]

Ok as you all know from my previous post it's about the original SIO2SD in a smaller form. What specific, has the same enclosure like my older project SDrive Micro.
Based to latest schematic "version 2" from original inventor, have some minor improvements.

-As for the cpu the latest "low consumption" ATMega32A microcontroller in smd form.
-The 74LVC245 who guarantees good data transfer between the microcontroller and SDcard, in proper voltage levels also.
-New 47nf capacitors for better button response.
-Extra resistor and capacitor added in output of low dropout voltage regulator, for better voltage stability particularly at "no load" condition. As result of that is much higher reliability and compatibility with more SD cards.
-New tactile switches with smooth feeling for more comfortable use.
-Push on-Push off type SD connector.

Now about the plastic enclosure, is made in CNC router with proper cuts in all dimensions. Additional a logo and some "words" is engraved direct on plastic. Actually not as visible as in the photo, but add a nice effect as opposed to not exist at all.
The device is programmed with the latest firmware 3.1RC2, and work perfect with the 3.5 fast loader.

I try to run a small production from that, so anyone who want to buy one are welcome! The final price as I noted in the original post is 50 euro, plus 7 euro shipping and handling cost, plus Paypal fee. All the devices will be mailed as "registered irregular letters" with track numbers.
Devices will be ready for shipping in less than a month. As you most know from my previous project, always keep up to date my progress in public. Please anyone who want to buy one, send me pm and I will reply with the details. The same also for the community members who had expressed their interest in the first thread, because I don't know if still interested!

One more time thank you very much for looking.

Edited December 24, 2015 by santosp

[thgill]

I gotta admit, thats really nice looking.

 

Whats the overall dimensions of the enclosure?

[santosp]

70x50x20mm

Edited May 15, 2012 by santosp

[santosp]

 

 

A list with members who have expressed interest so far. I will update this frequently.

Edited May 16, 2012 by santosp

[Carl_R]

It looks very neat. I might be interested in buying one.

 

Regards,

Carl

[Grisu]

I will order one. You got PM

[santosp]

I will sent the details.

[npturton]

yup ill get one

[Pmetzen]

For me please also a Micro SIO2SD. Greeting, Pmetzen

[ggn]

I'll take 200 .

 

...seriously Mr santosp give me a call sometime .

Edited May 20, 2012 by ggn

[santosp]

Oh my god. I am reach.... I am reach :grin: :grin: :grin:

[ggn]

Oh my god. I am reach.... I am reach :grin: :grin: :grin:

 

Yes!

 

[+Philsan]

If you're not too "reach", I would like to buy one SIO2SD Micro. PM me for payment details please.

[Sleepy]

Hi santosp,

 

please put down TWO for me.

 

PN is sent.

 

Sleepy

[retrobits]

If still available, I'd also like to order one.

thanks santosp!

 

PM sent...

[Fratzengeballer]

Guess I need to change flat soon as I have too many of your devices, but this one just looks so lovely, take me down for 2

[SIO99]

I've only just found this. It sounds really interesting, because of the price. I can't afford Lotherek's version. I'm just going to check the exchange rates. What's the situation with ordering one now?

[VW]

Would this work with an American 800XL?

[mimo]

Would this work with an American 800XL?

it will work with all Atari 8bit home computers

[santosp]

@SIO99

 

You can check the order status on post Nr. 4 in this thread. I renew frequently.

Now about the situation! If all members who have express their interest eventually buy their devices, from the total 40 pieces only 4 more is available. After that I dont know if or when I will make again. Perhaps follow some other project, or maybe nothing.

Next week I will be ready to post about 15 to 20 more devices.

Edited June 14, 2012 by santosp

[+wood_jl]

Hi santosp.

 

Put me down for TWO of these.

 

PM coming.

[AtariGeezer]

PM sent

[lumbee74]

I would like to buy one also.

[telengard]

If there are any left, I'd like one please.

[santosp]

Order list update.