cOLeCoHiTMan Posted May 27, 2012 Share Posted May 27, 2012 Whats the best way to remove the silver CV case labels without creasing/damaging them? I am probably going to end up with another CV because I want the Galaxian that is with it and I see the front grill has one of the fins broken. I have case top with no sticker... so..... Quote Link to comment Share on other sites More sharing options...
RedRaider Posted May 27, 2012 Share Posted May 27, 2012 I would assume you would do it the same way you would do other labels, heat. Try using a heat gun to heat up the glue and carefully remove the label. The age of the stickers will increase the chance of tearing it, so go slowly and do not over-heat them. Quote Link to comment Share on other sites More sharing options...
cOLeCoHiTMan Posted May 27, 2012 Author Share Posted May 27, 2012 hmm no longer a concern.. he's moved it from our local classifieds to ebay... forget that. not bidding high on a non perfect colecovision Quote Link to comment Share on other sites More sharing options...
SlowCoder Posted June 5, 2012 Share Posted June 5, 2012 I have access to a heat gun. But would a hair drier on high heat be sufficient to loosen the glue? Quote Link to comment Share on other sites More sharing options...
Dave Farquhar Posted June 11, 2012 Share Posted June 11, 2012 Sorry to post so late to the topic... I don't get around here much these days. A hair dryer is worth a try. If heat doesn't do the job, you could also use lighter fluid. Dab some around the label, let it wick under, then lift gently and apply more fluid. With some patience, you should be able to dissolve all of the adhesive. And the lighter fluid won't damage the plastic. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.