JagLynx Posted July 30, 2012 Share Posted July 30, 2012 Hey. I have a Jag pro controller with just one seriously bent but not broken off connector. Can I simply use a pair of tweezers or does it need a Professional repair? Thanks. JagLynx Quote Link to comment Share on other sites More sharing options...
Tyrant Posted July 30, 2012 Share Posted July 30, 2012 It's tricky, tweezers or needle-nose pliers can usually fix them, but it might break off while you're working with it. However, if it does break off, it's not too hard to re-wire a new plug onto the end of the cable. 3 Quote Link to comment Share on other sites More sharing options...
DecapX3 Posted July 30, 2012 Share Posted July 30, 2012 yeah i have two controllers and one is a 4 pin row set the other is 5 pin row set didnknownthey made two kinds of pinsets but the apparently did one controller must have been made at a different time! Quote Link to comment Share on other sites More sharing options...
DecapX3 Posted July 30, 2012 Share Posted July 30, 2012 It's tricky, tweezers or needle-nose pliers can usually fix them, but it might break off while you're working with it. However, if it does break off, it's not too hard to re-wire a new plug onto the end of the cable. if is bent really bad it may break but if it breaks off just the end it should still connect and work i have a broken pin on one of mine and its not a problem! Quote Link to comment Share on other sites More sharing options...
JagLynx Posted July 30, 2012 Author Share Posted July 30, 2012 Interesting. I have another broken pin controller so it looks like the bend alot. But I'll try it out and see if it still works. It might not be able to fit in all the way though because the pin is bent and not completely broken. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.