+Lee Stewart Posted December 24, 2012 Author Share Posted December 24, 2012 Hi Lee, any chance the FPL will be usable outside of Forth? Absolutely! I have made a few changes to accommodate the recent changes to TurboForth v1.2; but, they can be undone for other uses. The TF version can also be used, of course. I just need to finish the user manual so it's clear to any user how information is passed to/from the library. What I had that used FAC and ARG was pretty much completed (including the manual); but, @Willsy needed to make some changes to the TF core that made it easier to pass information in registers. I'm pretty much done with that version except for patching the manual. I was kind of waiting for Mark to weigh in on my high-level TF changes before continuing. That said, let me know what you need or are interested in and I should be able to get it to you. I should mention that the FPL, as it stands at the moment, cannot be loaded by the E/A module because it must be loaded at 2000h (AORGed there). That can be changed to be relocatable, I'm sure, if that would work better for you. ...lee Quote Link to comment Share on other sites More sharing options...
Willsy Posted December 24, 2012 Share Posted December 24, 2012 Hi Lee I've been somewhat broad-sided with a chest infection but I'm getting back on my feet now. I'll look at the High-level Forth code today! Mark Quote Link to comment Share on other sites More sharing options...
+Lee Stewart Posted December 24, 2012 Author Share Posted December 24, 2012 Hi Lee I've been somewhat broad-sided with a chest infection but I'm getting back on my feet now. I'll look at the High-level Forth code today! Mark No prob. Like I've said somewhere before, I have more discretionary time than you. Glad you're on the mend. ...lee Quote Link to comment Share on other sites More sharing options...
+InsaneMultitasker Posted December 24, 2012 Share Posted December 24, 2012 Absolutely! I have made a few changes to accommodate the recent changes to TurboForth v1.2; but, they can be undone for other uses. The TF version can also be used, of course. I just need to finish the user manual so it's clear to any user how information is passed to/from the library. What I had that used FAC and ARG was pretty much completed (including the manual); but, @Willsy needed to make some changes to the TF core that made it easier to pass information in registers. I'm pretty much done with that version except for patching the manual. I was kind of waiting for Mark to weigh in on my high-level TF changes before continuing. That said, let me know what you need or are interested in and I should be able to get it to you. I should mention that the FPL, as it stands at the moment, cannot be loaded by the E/A module because it must be loaded at 2000h (AORGed there). That can be changed to be relocatable, I'm sure, if that would work better for you. ...lee I don't have anything at the moment - just thinking ahead to a project I had started some time ago and may pick up next year Quote Link to comment Share on other sites More sharing options...
matthew180 Posted March 8, 2013 Share Posted March 8, 2013 Hey Mark, where is that post where you detailed what VDP registers you were setting for 80-column mode (2 GMODE)? I know we talked about it *somewhere* but I can't find it. Quote Link to comment Share on other sites More sharing options...
+Lee Stewart Posted March 8, 2013 Author Share Posted March 8, 2013 Hey Mark, where is that post where you detailed what VDP registers you were setting for 80-column mode (2 GMODE)? I know we talked about it *somewhere* but I can't find it. Perhaps you can tease it out of Mark's source code for "Graphics Words" on his website here. It's the first routine (_gmode). ...lee Quote Link to comment Share on other sites More sharing options...
matthew180 Posted March 8, 2013 Share Posted March 8, 2013 Cool, got it, thanks for the link. Freaking 9938 crap-o-la strikes again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.