Jump to content
Elerach

SkunkGUI

Recommended Posts

Anyone used Skunkgui on Win10?

 

I didn't but it prompted me to try JiFFI and I'm happy to report that it survived yet another O/S upgrade!

  • Like 1

Share this post


Link to post
Share on other sites

One of these days ill need to give JiFFI a try. I haven't really dug into it but I assume it allows for direct upload to the Skunk by calling to JCP?

Edited by orpheuswaking
  • Like 1

Share this post


Link to post
Share on other sites

One of these days ill need to give JiFFI a try. I haven't really dug into it but I assume it allows for direct upload to the Skunk by calling to JCP?

 

Here's Jiffi:

jiffi_jaguar_z8sgn.png

  • Like 2

Share this post


Link to post
Share on other sites

I tried jiffi earlier for sending to skunk. Easy as pie :)

 

I already use jiffi for creating uls boot cds which its awesome for too.

 

Fyi, windows 10 as well.

  • Like 2

Share this post


Link to post
Share on other sites

Thanks for the info everyone, Looks like I'll be using JiFFI going forward. I need to set it up so I can play downfall for the HSC>

  • Like 3

Share this post


Link to post
Share on other sites

I recently got a new 2-in-1 tablet PC and updated to W10. I did have to disable signature recognition through start-up settings to load the Skunk drivers. No problems running Jiffi.

In case it helps anyone, this is the process I used in Windows 10 to install the skunk drivers. I had the picture handy on my phone still so here it is.

 

Edit: Have fun reading that rotated picture ;)

post-42253-0-08684500-1443349822_thumb.jpg

Edited by Sporadic
  • Like 3

Share this post


Link to post
Share on other sites

In case it helps anyone, this is the process I used in Windows 10 to install the skunk drivers. I had the picture handy on my phone still so here it is.

 

Edit: Have fun reading that rotated picture ;)

Yeah, thats the process I used too.

Share this post


Link to post
Share on other sites

 

Here's Jiffi:

 

 

Eh? I'll have to give this a shot. Certainly looks quicker than using the command prompt in Windows.

Share this post


Link to post
Share on other sites

Eh? I'll have to give this a shot. Certainly looks quicker than using the command prompt in Windows.

 

Not sure if I'm old/lazy or just more sensible, but I haven't used the command promt with the skunk for... quite some time. I thought tools for this were pointless and for people scared of telling a computer what to do via the voodoo of magic words. Turns out I was wrong.

Edited by sh3-rg
  • Like 1

Share this post


Link to post
Share on other sites

Ended up downloading JiFFI and running it on my Windows 7 laptop rather than my Windows 10 box. Wonderful little piece of software.

  • Like 2

Share this post


Link to post
Share on other sites

For what it's worth, the Skunkboard drivers are just LibUSB packaged using their installer. If there is a newer LibUSB that works better with Windows10 (and still works with the API used in JCP), there is a good likelihood it will work just fine. Might be worth a try.

Share this post


Link to post
Share on other sites

Ended up downloading JiFFI and running it on my Windows 7 laptop rather than my Windows 10 box. Wonderful little piece of software.

 

Yeah, I like Windows 10 as well ;)

Share this post


Link to post
Share on other sites

Just got a nice Dell with Windows 10, in part so I can start using my Skunk again (and maybe burn some discs!)

 

I'm going to download the drivers, Jiffi, and attempt to make things work tonight.

 

Anything special I need to do? Anyone run into any problems uploading to Skunk via Windows 10?

 

Fangs!

Share this post


Link to post
Share on other sites

Hey guys, struggling a bit. Just wanted to use my Skunk first time since appr 2 years. The Skunk seem to work as it should. Both banks are ok, the uploaded files from long ago working perfectly fine. Since I have two other notebooks than 2 years ago I installed SkunkGUI on my

 

1.) Microsoft Surface Pro Notebook with Win10

2.) MacBook Pro with OSX 10.13.6

 

I used three different USB cables.

 

I get the Windows Tone if I turn the Jaguar on ... so the Computer recognize the USB device ...

 

BUT ... I fail to upload files to the banks.

 

I mean, SkungGUI is no rocket science, it worked in the past.

 

Select a file (it's in .jag format)

Choose a bank

Klick on GO

 

For a split of a second the "Sending File to Skunkboard" window appears, but disappears then immediately.

 

Resetting the Skunk or trying to get the serial number doesn't work either.

 

Have I forgot something? Any additional files which need to be copied somewhere? 

Share this post


Link to post
Share on other sites
1 hour ago, evisu said:

Hey guys, struggling a bit. Just wanted to use my Skunk first time since appr 2 years. The Skunk seem to work as it should. Both banks are ok, the uploaded files from long ago working perfectly fine. Since I have two other notebooks than 2 years ago I installed SkunkGUI on my

 

1.) Microsoft Surface Pro Notebook with Win10

2.) MacBook Pro with OSX 10.13.6

 

I used three different USB cables.

 

I get the Windows Tone if I turn the Jaguar on ... so the Computer recognize the USB device ...

 

BUT ... I fail to upload files to the banks.

 

I mean, SkungGUI is no rocket science, it worked in the past.

 

Select a file (it's in .jag format)

Choose a bank

Klick on GO

 

For a split of a second the "Sending File to Skunkboard" window appears, but disappears then immediately.

 

Resetting the Skunk or trying to get the serial number doesn't work either.

 

Have I forgot something? Any additional files which need to be copied somewhere? 

Maybe it's a driver issue. I had that too with my win 10 notebook.

 

Might want to try the zadiq drivers, we talked about it in this thread:

 

 

Share this post


Link to post
Share on other sites
23 minutes ago, PeterG said:

Maybe it's a driver issue. I had that too with my win 10 notebook.

 

Might want to try the zadiq drivers, we talked about it in this thread:

 

 

That's it ... thanks a lot for the quick help.

  • Like 1

Share this post


Link to post
Share on other sites
On 9/21/2015 at 9:00 PM, sh3-rg said:

 

Here's Jiffi:

jiffi_jaguar_z8sgn.png

Jiffi 1.5 ?
Did I miss something ?
I thought the latest version was 1.42

Share this post


Link to post
Share on other sites

Well, we are 2 then. I have based my JiFFI2 (rewritten in C with some additional features) on the 1.42 source code version.

For what I see in the 1.5 screenshot, there are 2 options added. 32 bits and 16 bits.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...