Jump to content
Sign in to follow this  
nitrosport

Help bring a heavy sixer back from the dead

Recommended Posts

I picked up a broken sears heavy sixer the other day. When i first got it, it was completely dead. I check the voltage on the power supply and it was fine. I cleaned the power switch and changed the voltage regulator and now it's showing signs of life.

 

Now when I turn it on, the static on the screen changes so it's finally getting power but thats about as far as I got. I can't get it to do anything else. What else should I try?

Share this post


Link to post
Share on other sites

99 percent of the time, if no random splotched graphics show up, and blank screen, It could be the

Quarts counter is not running at all.. Test For a Signal on an Oscope for the Timing pulse.

 

The other main reason could be that the Reset signal does not KICK in on power-up.

 

This is usually a failed 4.7uF cap that allows the TIA and RIOT to boot before the 6702.. and also

is testable with an Oscope.

 

Or you could just swap out the main CPU and the RIOT, the big chip, being not the TIA.. and see

if that works..

 

Hope that helped.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...