Omega-TI Posted June 25, 2020 Author Share Posted June 25, 2020 5 hours ago, Mehridian Sanders said: I had an Idea a while back about 3D printing a chassis modification, it would go in between the top and bottom of the chassis and allow for more components to be contained within. It would only increase thickness by 1.5". your idea has revived my creativity on this. Nice idea! Of course you'll also have to make a modification/replacement for the slide switch too. Quote Link to comment Share on other sites More sharing options...
Mehridian Sanders Posted June 25, 2020 Share Posted June 25, 2020 1 hour ago, Omega-TI said: Nice idea! Of course you'll also have to make a modification/replacement for the slide switch too. Yes, I thought it might help those who are going to be using the Speech Synth TIPI/32k. Can move the speech synth board to the interior. Room for growth. and more work needed. Well, Wife and I have agreed we are going to get a 3D printer here soon. this may be on hold until then. 1 Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted June 30, 2020 Share Posted June 30, 2020 Good-as-new looking Speech Synthesizer for a not terrible price: https://ebay.com/itm/184346753323 3 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted June 30, 2020 Author Share Posted June 30, 2020 1 hour ago, OLD CS1 said: Good-as-new looking Speech Synthesizer for a not terrible price: https://ebay.com/itm/184346753323 No surprise that it's gone already 2 Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted June 30, 2020 Share Posted June 30, 2020 Nanos are up again too. . . 2 Quote Link to comment Share on other sites More sharing options...
+hloberg Posted June 30, 2020 Share Posted June 30, 2020 17 hours ago, Omega-TI said: No surprise that it's gone already I just bought one, looks as nice, for $5 more. the price on those are finally coming down to more reasonable prices (one guy wanted a ridiculous $70 for one). 1 Quote Link to comment Share on other sites More sharing options...
ti99iuc Posted July 2, 2020 Share Posted July 2, 2020 Hello for who is interested there is a second wave of about 40 TI items listed on ebay 1 Quote Link to comment Share on other sites More sharing options...
Stuart Posted July 2, 2020 Share Posted July 2, 2020 There's a set of original, unbuilt Powertran Cortex circuit boards on eBay, with a set of keyboard switches as a separate auction. If you fancy building some original hardware ... Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted July 6, 2020 Share Posted July 6, 2020 More nanoPEB v1 (9902 UART) up. Anyone have a direct line to schmutzig? I emailed him a few months ago about a replacement IDE angle connector and never heard from him. Alternatively, does anyone have any such things or know a good source? Also, this guy has a bunch of white label Scott Foresman carts. Quote Link to comment Share on other sites More sharing options...
wierd_w Posted July 6, 2020 Share Posted July 6, 2020 (edited) Just use ordinary IDC header strip, 90 degree. Clip at 44 pins. For instance, this assortment is inexpensive, and contains suitable angled header. https://www.amazon.com/Glarks-Connector-Assortment-Stackable-Breakaway/dp/B07CWSXY7P/ref=sr_1_13?dchild=1&keywords=2.54mm+header+strip+angled&qid=1594004590&sr=8-13 Also has various other useful headers. Or, straight up angled header. 80pin break away 2 row. https://www.amazon.com/2-54mm-80-Pin-Degree-Header-Connector/dp/B00REGUVCA/ref=sr_1_15?dchild=1&keywords=2.54mm+breakaway+header+right+angle&qid=1594004869&sr=8-15 Edited July 6, 2020 by wierd_w Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted July 9, 2020 Share Posted July 9, 2020 (edited) Myarc Disk Controller DDCC-1 Where do I get the latest software version ? (I have listed v1.5, but only have v1.3 here) https://www.ebay.com/itm/254646415059 Edit: My .BIN is v1.5, but I need .DSK or TIFILE Edited July 9, 2020 by Schmitzi 1 Quote Link to comment Share on other sites More sharing options...
+retroclouds Posted July 9, 2020 Share Posted July 9, 2020 He also got a Gramulator up for sale: https://www.ebay.com/itm/Ti-99-4A-Gramulator-CaDD-Electronics-Ver-1-0-Vintage-Ti-Computer-Add-On/254643372049?_trkparms=aid%3D1110002%26algo%3DSPLICE.SOI%26ao%3D1%26asc%3D225074%26meid%3Da7e1bec806f447c69504fbf01ded077e%26pid%3D100047%26rk%3D9%26rkt%3D12%26sd%3D254646415059%26itm%3D254643372049%26pmt%3D0%26noa%3D1%26pg%3D2047675%26algv%3DSellersOtherItemsV2&_trksid=p2047675.c100047.m2108 Never seen that one before. Was it released before or after MG GramKracker ? 1 Quote Link to comment Share on other sites More sharing options...
+FarmerPotato Posted July 9, 2020 Share Posted July 9, 2020 On 7/5/2020 at 9:45 PM, OLD CS1 said: More nanoPEB v1 (9902 UART) up. Anyone have a direct line to schmutzig? I emailed him a few months ago about a replacement IDE angle connector and never heard from him. Alternatively, does anyone have any such things or know a good source? Also, this guy has a bunch of white label Scott Foresman carts. Like Weird_w says, it really is just the generic snap apart pin row. I'm getting a lot of my connector thingys from Phoenix Enterprises. Here is there R/A page: https://www.peconnectors.com/headers-breakaway-r/a-.100/ It's where I found the Dual 30-pin SIMM Angle socket... and I've been finding plenty of other ways to give them my business. If you want the IDE shrouded part you may have imagined, look here: https://www.peconnectors.com/box-headers-pcb-.100-r/a/ The part that I can't find reasonably, is the R/A female header 2x6 (rare) or just 2x8 (pricey here) https://www.peconnectors.com/female-headers-pcb-2x-row-.100/hws11162/ I've even looked in China. Despite the 2x6 appearing in large quantity on everything I've got... I cannot find a source that has 2x6. https://www.pololu.com/ hasn't got any either. I got a lot of Samtec 2x15 on clearance, and I'm sawing those into 2x6 hunks. Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted July 9, 2020 Share Posted July 9, 2020 2 hours ago, FarmerPotato said: The part that I can't find reasonably, is the R/A female header 2x6 (rare) or just 2x8 (pricey here) https://www.peconnectors.com/female-headers-pcb-2x-row-.100/hws11162/ I've even looked in China. Despite the 2x6 appearing in large quantity on everything I've got... I cannot find a source that has 2x6. https://www.pololu.com/ hasn't got any either. I got a lot of Samtec 2x15 on clearance, and I'm sawing those into 2x6 hunks. Here you go, not too pricey either. I think I may even have bought from this seller once or twice. . . Quote Link to comment Share on other sites More sharing options...
+FarmerPotato Posted July 9, 2020 Share Posted July 9, 2020 24 minutes ago, Ksarul said: Here you go, not too pricey either. I think I may even have bought from this seller once or twice. . . Thank you, that is the real deal! I can do 18 cents. (Sullins direct wants 50 cents, SamTec wants 66 cents for surface mount, somebody else at 1.24) Can I just toss my shopping list at you? I have all the shrouded headers I could want, but now I need short IDC ribbon cables. DirtyCables prices a 10cm IDC cable at around $2.25 in qty 100 (the # of pins doesn't change it much.) The Dupont kind I am also looking for.. here's one for $2 https://www.ebay.com/itm/Single-Double-Row-DuPont-2-54mm-Rainbow-Cable-Ribbon-Jumper-Wire-Female-Female/264011141771?var=563541948281 The 2x4 could be called "HexBus" replacements. Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted July 10, 2020 Share Posted July 10, 2020 Anything special about a black PHP-1240? Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted July 10, 2020 Share Posted July 10, 2020 Anything special about a black PHP-1240?NopeSent from my LM-V600 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Airshack Posted July 19, 2020 Share Posted July 19, 2020 Cheap 99/4A with a nice box for collectors 1 Quote Link to comment Share on other sites More sharing options...
Airshack Posted July 20, 2020 Share Posted July 20, 2020 NanoPEBs are available! Two! Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted July 20, 2020 Author Share Posted July 20, 2020 It looks like some outfit called "thebrewingacedemy" is now producing TIPI cards for the P-Box on Ebay << HERE >> Is he a one of us here on AtariAge? Blue The Brewing Academy Version of the TIPI P-Box Card Arcadeshopper is selling them for $10.00 less though << HERE >> Green Arcadeshopper Version of the TIPI P-Box Card Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted July 20, 2020 Share Posted July 20, 2020 Actually I'm selling the exact same cards for 10$ cheaper.. Sent from my LM-V600 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted July 20, 2020 Author Share Posted July 20, 2020 2 minutes ago, arcadeshopper said: Actually I'm selling the exact same cards for 10$ cheaper.. Sent from my LM-V600 using Tapatalk Yeah, I mentioned that. Most of us here know you, and how you've supported the community over the years, so to me it's a no-brainer. If I was in the market for one, I'd buy from you. Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted July 20, 2020 Share Posted July 20, 2020 Yeah, I mentioned that. Most of us here know you, and how you've supported the community over the years, so to me it's a no-brainer. If I was in the market for one, I'd buy from you.No I mean he is making the cards I am stocking currently. They are the same color and markingsSent from my LM-V600 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted July 20, 2020 Author Share Posted July 20, 2020 Just now, arcadeshopper said: No I mean he is making the cards I am stocking currently. They are the same color and markings Oh really? I thought yours were green with slightly different header pins. Well still, if it's the same exact card, of course people should buy from you if it's cheaper! Quote Link to comment Share on other sites More sharing options...
+MacRorie Posted July 20, 2020 Share Posted July 20, 2020 (edited) 35 minutes ago, Omega-TI said: It looks like some outfit called "thebrewingacedemy" is now producing TIPI cards for the P-Box on Ebay << HERE >> Is he a one of us here on AtariAge? Blue The Brewing Academy Version of the TIPI P-Box Card Yes, been here a bit. Not as vocal as I could be, I suppose. Quote Arcadeshopper is selling them for $10.00 less though << HERE >> Green Arcadeshopper Version of the TIPI P-Box Card Indeed, I am producing the ones Arcadeshopper is selling and they are the same blue ones as pictured on eBay. However, since eBay charges 10% for their services, the price goes up. I have the exact ones for the same price here: https://thebrewingacademy.com/collections/ti-99-4a/products/tipipeb-ti-raspberry-pi-interface-for-the-ti-peripheral-expansion-box However, you should buy from whomever you feel comfortable with. As a collarlary to that: if you buy from Arcadeshopper and love it: it is all his doing! If you buy it from him and hate it, then all the blame is mine! -M Edited July 20, 2020 by MacRorie Spellcheck/Autocorrect errors 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.