ed1475 Posted October 6, 2013 Share Posted October 6, 2013 I uploaded a video of an ADAM printing to a Tandy DPM-132 dot matrix printer. The ADAM uses a parallel printer interface card in the middle expansion slot and Orphanware Fastpatch V2.0 software to patch the ADAM EOS operating system. The video also shows the ADAM daisy wheel printer in action. 3 Quote Link to comment Share on other sites More sharing options...
NIAD Posted October 6, 2013 Share Posted October 6, 2013 Great video Ed. For those that are interested, it is best to stick with an EPSON compatible dot matrix printer (IIRC the FX series, but I'd have to double check) and most of these older D.M.P. did offer dip switch settings that would allow one to reconfigure what standard the D.M.P. used. BITD, we always preferred the Panasonic line of printers (KX-P1080, 1090, etc.) for their great compatibility and good price point. As far as E.O.S. patch software that needs to be loaded in order for the ADAM to output to a D.M.P., Orphanware's Fastpatch 2.0 was supplied for many years, but later was replaced by Walters Software's Easy Printer Patch. However, your best option to use now is Walters Software's SmartWRITER Elite as it corrects a lot of bugs in SmartWRITER as well as provides greatly enhanced drivers for Parallel Printer output. The above mentioned programs are available as disk images in the software package downloads I have made available in the past. 2 Quote Link to comment Share on other sites More sharing options...
Pixelboy Posted October 6, 2013 Share Posted October 6, 2013 The thing that impresses me is the fact that wide paper with side holes is still available today. 3 Quote Link to comment Share on other sites More sharing options...
NIAD Posted October 7, 2013 Share Posted October 7, 2013 The thing that impresses me is the fact that wide paper with side holes is still available today. It's called Tractor Feed Paper for you young folk out there. 3 Quote Link to comment Share on other sites More sharing options...
Pixelboy Posted October 7, 2013 Share Posted October 7, 2013 Ah yes, Tractor Feed. And way back then, hard disks were called data silos, and a pile of punch cards was called a paper harvest. Those darn Unix programmers were all farmers when they were young. 6 Quote Link to comment Share on other sites More sharing options...
retroillucid Posted October 7, 2013 Share Posted October 7, 2013 Ah yes, Tractor Feed. And way back then, hard disks were called data silos, and a pile of punch cards was called a paper harvest. Those darn Unix programmers were all farmers when they were young. Quote Link to comment Share on other sites More sharing options...
jblenkle Posted October 7, 2013 Share Posted October 7, 2013 Ha, ha...I still use tractor feed labels...one sheet of 12 mailing labels at a time in my laser printer. And I still have an Epson dot matrix hooked up to my ADAM, Atari 130XE and Atari ST. It's called Tractor Feed Paper for you young folk out there. Quote Link to comment Share on other sites More sharing options...
Master Phruby Posted October 7, 2013 Share Posted October 7, 2013 The Adam sure had a slow daisy wheel printer. or were daisy wheels always that slow? I don't remember. Quote Link to comment Share on other sites More sharing options...
JamesD Posted October 7, 2013 Share Posted October 7, 2013 The Adam sure had a slow daisy wheel printer. or were daisy wheels always that slow? I don't remember.That's slow even for a daisy wheel printer. Quote Link to comment Share on other sites More sharing options...
NIAD Posted October 7, 2013 Share Posted October 7, 2013 The Adam sure had a slow daisy wheel printer. or were daisy wheels always that slow? I don't remember. Slow and loud, that's for sure. I can't remember off the top of my head what the "characters per second" was, but I seem to recall 10 or 12 cps. I do recall advertising stating 120 words per minute, but they never did state if those words were 1 or 2 characters long or more reasonable lengths to make such claims. That printer came in handy in high school however, especially with teachers that wouldn't accept papers printed with a Dot Matrix Printer. It also made for a pretty impressive computer setup until I got a separate ADAM power supply, I mean... How many kids had a computer with two printers at that time? Quote Link to comment Share on other sites More sharing options...
ZarK Posted February 17, 2014 Share Posted February 17, 2014 (edited) Are there any Laser Printers that emulate the FX protocol? That would be cool! although useless, but then so is using a tractor feed dot matrix printer... says the guy who still has a 24 pin panasonic Edit: A quick http://duckduckgo.com search says yes! Laser printer emulating Epson FX mode protocols! ... I didn't search if those models I found have Parallel ports or not... Edited February 17, 2014 by ZarK Quote Link to comment Share on other sites More sharing options...
ValkerieSilk Posted February 17, 2014 Share Posted February 17, 2014 See, people still print from the Adam.. Hurray! I uploaded a video of an ADAM printing to a Tandy DPM-132 dot matrix printer. The ADAM uses a parallel printer interface card in the middle expansion slot and Orphanware Fastpatch V2.0 software to patch the ADAM EOS operating system. The video also shows the ADAM daisy wheel printer in action. 1 Quote Link to comment Share on other sites More sharing options...
ValkerieSilk Posted February 17, 2014 Share Posted February 17, 2014 The thing that impresses me is the fact that wide paper with side holes is still available today. Quote Link to comment Share on other sites More sharing options...
ValkerieSilk Posted February 17, 2014 Share Posted February 17, 2014 Awesome! Thanks for this info.. Great video Ed. For those that are interested, it is best to stick with an EPSON compatible dot matrix printer (IIRC the FX series, but I'd have to double check) and most of these older D.M.P. did offer dip switch settings that would allow one to reconfigure what standard the D.M.P. used. BITD, we always preferred the Panasonic line of printers (KX-P1080, 1090, etc.) for their great compatibility and good price point. As far as E.O.S. patch software that needs to be loaded in order for the ADAM to output to a D.M.P., Orphanware's Fastpatch 2.0 was supplied for many years, but later was replaced by Walters Software's Easy Printer Patch. However, your best option to use now is Walters Software's SmartWRITER Elite as it corrects a lot of bugs in SmartWRITER as well as provides greatly enhanced drivers for Parallel Printer output. The above mentioned programs are available as disk images in the software package downloads I have made available in the past. Quote Link to comment Share on other sites More sharing options...
NIAD Posted February 17, 2014 Share Posted February 17, 2014 Are there any Laser Printers that emulate the FX protocol?That would be cool! although useless, but then so is using a tractor feed dot matrix printer... says the guy who still has a 24 pin panasonicEdit:A quick http://duckduckgo.com search says yes! Laser printer emulating Epson FX mode protocols! ... I didn't search if those models I found have Parallel ports or not...We used to use a Panasonic Laser Printer with the ADAM and I think the model # was KX-P4450 or something along those lines. Worked great! 1 Quote Link to comment Share on other sites More sharing options...
ValkerieSilk Posted March 2, 2014 Share Posted March 2, 2014 Seriously? We used to use a Panasonic Laser Printer with the ADAM and I think the model # was KX-P4450 or something along those lines. Worked great! Quote Link to comment Share on other sites More sharing options...
adamcon Posted March 2, 2014 Share Posted March 2, 2014 Seriously? Seriously.......the ADAM can use just about any printer, including the ink jets and lasers, as long as the printer has a parallel connection and uses Epson codes. A wonder, ain't it? 1 Quote Link to comment Share on other sites More sharing options...
ValkerieSilk Posted March 2, 2014 Share Posted March 2, 2014 Wow, so cool! Seriously.......the ADAM can use just about any printer, including the ink jets and lasers, as long as the printer has a parallel connection and uses Epson codes. A wonder, ain't it? Quote Link to comment Share on other sites More sharing options...
NIAD Posted March 2, 2014 Share Posted March 2, 2014 Wow, so cool! Not to shabby for a computer that everyone likes to blame for the fall of Coleco. Hmm, seems to be that Coleco continued on for about four more years after abandoning the CV & ADAM and even bought some other toy companies along the way to their fateful end. So it wasn't the ADAM's fault afterall. Quote Link to comment Share on other sites More sharing options...
Pixelboy Posted March 2, 2014 Share Posted March 2, 2014 Not to shabby for a computer that everyone likes to blame for the fall of Coleco. Hmm, seems to be that Coleco continued on for about four more years after abandoning the CV & ADAM and even bought some other toy companies along the way to their fateful end. So it wasn't the ADAM's fault afterall. Yes it was. Quote Link to comment Share on other sites More sharing options...
NIAD Posted March 3, 2014 Share Posted March 3, 2014 Yes it was. Do you really want to go there with me? Quote Link to comment Share on other sites More sharing options...
Pixelboy Posted March 3, 2014 Share Posted March 3, 2014 Do you really want to go there with me? Not with you right now, no. Maybe next year! Quote Link to comment Share on other sites More sharing options...
retroillucid Posted March 3, 2014 Share Posted March 3, 2014 Not to shabby for a computer that everyone likes to blame for the fall of Coleco. Hmm, seems to be that Coleco continued on for about four more years after abandoning the CV & ADAM and even bought some other toy companies along the way to their fateful end. So it wasn't the ADAM's fault afterall. I agree, though it did not help either Problem was not the Coleco products, problem was management ALOT of cash was spent buying board games and other CRAPPY toys company Quote Link to comment Share on other sites More sharing options...
NIAD Posted March 3, 2014 Share Posted March 3, 2014 Maybe next year! My calendar is clear for next year... sounds like a date. Quote Link to comment Share on other sites More sharing options...
coleconut Posted March 4, 2014 Share Posted March 4, 2014 I uploaded a video of an ADAM printing to a Tandy DPM-132 dot matrix printer. The ADAM uses a parallel printer interface card in the middle expansion slot and Orphanware Fastpatch V2.0 software to patch the ADAM EOS operating system. The video also shows the ADAM daisy wheel printer in action. Oooh you could print out some racy RLE's with that setup. Hubba hubba. Sound of the DMP reminds me of my years working at the airport, they had printers like that at every gate up to a couple years ago to print out manifests and the like - actually might still do. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.